Spray.Bike Pop

Spray.Bike is a bicycle paint spray with an innovative powder coating, designed for both beginners and experienced painters.

Spray.Bike is an exclusive dry powder coating developed specifically for bicycles. The acrylic mixture contains dry particles that coat the frame of your bike with strong opacity.

The innovative acrylic formula makes Spray.Bike perfect for customizing, repairing, and restoring your bicycle. Ensure that the surface is clean and dry. Wear protective gloves, clothing, and eye and face protection. Always spray in an open outdoor area. Shake the can for at least 3 minutes before use. Perform a test spray for 2-3 seconds before applying.

The optimal spraying temperature is between 20-25°C. Always spray with the can in a vertical position, as otherwise the paint may spray unevenly. For solid colors, spray the surface from a distance of 30 cm. Keep your hand moving while spraying. Allow the paint to dry for about 10 minutes and repeat the process a second time.

At the end, turn the can upside down and spray for two seconds before storing. Protect the can from sunlight and temperatures above 50°C. For a satin or glossy topcoat, finish with Spray.Bike Frame Builder’s Transparent Finish – Satin/Gloss. For a matte topcoat, use Frame Builder’s Transparent Finish – Matte.

Physical properties:

Butane/Propane mixture
Density: 0.6-0.8 g/L
Flash point: -104 °C
Drying time: Touch (20°C, humidity <65%): 5-10 min
Thorough drying (20°C, humidity <65%): 1 h
Maximum hardness: 24 hours
Coverage: 4 m² per 400 ml
Coat thickness: 200 µm (wet), 50-100 µm (dry)
Can pressure: 4 bar (20°C), 8 bar (50°C)
Contents: 400 ml/340 g (net)
Shelf life: at least 5 years
VOC content: 640 g/L.