Item: Lehmfarbe
Rating: 5
Author: mischgeli82

productRatingOverviewPageQuery

Topleem

Solvent-free, permanently elastic wall and ceiling paint with a fine texture for indoor use, washable according to EN 13 300.

Clay paint is breathable and moisture-regulating, contributing to a healthy indoor climate. It has antistatic properties, provides good coverage when wet, and can be applied with minimal dripping and splattering. With a very high solids content, the paint offers excellent filling and covering capabilities.

Areas of application:
For opaque and filling coatings on dry, absorbent, grease-free surfaces such as wallpaper, plaster, and typical mineral surfaces, as well as on solid old coatings and wood.

Drying time:
Repaintable after 6 to 12 hours, depending on room temperature and humidity. Final drying takes about 10 days.

Coverage:
Approximately 0.10 to 0.17 liters per m²; about 6 to 8 m² per liter.

Application instructions:

Preparation:
Water-soluble old coatings such as glue or lime paints must be thoroughly removed. Non-adhering paint residues should be brushed off. Very smooth and less absorbent surfaces should be mechanically roughened. Highly absorbent and sanding surfaces must be pre-treated.

Application:
The paint should be applied evenly and thinly with a roller or brush. It should be spread evenly in all directions. On light surfaces, usually one coat is sufficient. For highly absorbent surfaces (clay plaster, sand-lime brick, etc.), we recommend a primer coat with diluted paint (max. 10% water). After drying, the final coat should be applied undiluted. Each layer of paint must be dry before applying the next one! Note: Clay paint is a natural product that may show slight color variations from batch to batch. Therefore, care should be taken to ensure batch consistency during application. Buckets from different batches should be mixed if necessary.

Search

Settings

Customer account

Comparison lists

Watch lists

Cart

Product ratings