Raid Mosquito plug

For optimal results, activate the Raid insect plug 30 minutes in advance. One device is sufficient for a room up to 30 m³ or 12 m² with a ceiling height of 2.50 m. For larger rooms, please use additional devices accordingly. When the plug is not in use, the refill can remain in the device. Thanks to the rotatable anti-mosquito plug, the device can be adapted to any socket. Always keep the bottle in an upright position. When the active ingredient is depleted, simply replace it with a new refill to maintain protection against mosquitoes and gnats. You can safely use the product according to the instructions. Remove the cap of the refill by pressing and twisting simultaneously, and screw it tightly into the plug. Rotate the plug so that the bottle is in a vertical position. Plug the device into the socket (230 V) to activate mosquito protection. The indicator light shows that the device is active. To turn off the device, simply unplug it. The refill bottle contains the active ingredient solution as well as a wick coated with aluminum. When the plug is activated, the active ingredient is released through the wick due to the heat generated by the electric plug (electronic vaporizer). Only replace the refill when the device is unplugged. Do not touch the wick. Please observe safety instructions on the packaging. When using the electric mosquito protection plug, ensure adequate ventilation and do not cover the device with any material (such as bed sheets, etc.). The window may be tilted but should not be fully opened, as this would allow too much active ingredient to escape, compromising the effectiveness of the insecticide. Dispose of completely empty containers in the recycling collection. Partially empty containers should be disposed of as hazardous waste.