Questions about Steffen Wireless adapter plug with remote control

You can operate 2 x 3 wireless adapter plugs in the same room, as they are controlled via a remote control and usually work with individual codes that prevent them from interfering with each other. Each wireless adapter plug has its own code, which is only assigned once so that the devices do not interfere with each other. This makes it possible to operate several wireless plugs in the same room at the same time without them interfering with each other.

You can either control up to four sockets individually or switch all four on and off at the same time.

When using the Steffen "wireless adapter plug", there are a few aspects to consider to ensure that there are no significant power losses: ## Contact resistances If you plug a connector strip into the wireless adapter plug, the contact resistances between the plugs and the sockets can lead to a small current loss. However, this effect does not only occur when plug connectors are cascaded, but can also occur when using a single plug connector. ## Self-consumption of the socket outlet Radio-controlled sockets consume energy themselves, especially when they are ready to receive or switch the power on and off. However, this consumption is relatively low and is typically around 0.5 to 1.5 watts, depending on the model and switching status. ## Power interruption If the wireless adapter plug interrupts the power, the contact is completely disconnected and the connected device no longer receives any power. This means that there is no additional power loss through the socket itself when it is switched off. To summarise: The power loss through the use of the wireless adapter plug and a power strip is low and is mainly due to the contact resistances. The socket's own consumption is also minimal and should not normally have a major impact on overall power consumption.

According to our information, we unfortunately do not offer these separately.