Answer: Unfortunately, the item is only available as an EU version. The article is delivered approximately, as best as possible according to the CH standards, which is why only one 230 V Schuko AC socket (EU) is available. The other connections are firmly closed with a black Schuko (EU) socket cap.
In November and December (as far as i saw) there were some batches available for order. I pre-ordered mine, and it came around a month or so later. As there seems to be a high demand on those ecoflows, there might be a huge preorders-list (not only at digi) and demand with either the factory output not meeting demands or a transport to destination-stock-issue... Delta 2 is "quite" new, and overall, you should be able to order one and get one, question is when. This, you might ask Digitec-Cutomercare directly... BR - oh, and seasons greetings to you, Stanislav ;)
The prices are calculated on the basis of the daily price at the time, which is why such fluctuations may occur. In this case, we would simply recommend the cheapest one that meets your expectations in the condition description. :)
Balcony power stations are generally permitted in Switzerland up to 600W. The local electricity provider simply needs to be informed. I had no problems with CKW. A micro inverter is required to supply the electricity. This feeds the solar power into the domestic grid.
I have two 400W solar panels. Works great.
Yes, it can. In our case, charging is also possible at the external port (the one on the side for the additional battery or the Powerstream inverter).
But briefly: With mains power, you will have charged the part very quickly up to the set maximum - after that, solar is useless ... unless you have your use case for it :) unless you have your own use case for it :) LG and have fun
According to clarification with our supplier, the article will be delivered CH - compliant, i.e. sealed with a socket. We have no influence on the technical equipment.
Yes, you can connect 2 solar panels, but only if the voltage and current remain within the input limits. For this device, the limits are 11 to 60 V, a maximum of 15 A, and a total maximum solar input of 500 W.
Practically, with 2 panels, a parallel connection is usually more sensible than a series connection, because in series, the voltage adds up and 60 V can quickly be exceeded.
A good order of magnitude is 2 panels with a combined total of about 300 to 500 W. More watts is not automatically a problem, as long as the voltage stays below 60 V and the device limits the power to 500 W.
The EcoFlow Delta 2 charges via AC with up to 1200 W (approx. 5-6 A at 230 V). The AC charging speed can be adjusted via the EcoFlow app so that you can reduce the power accordingly, e.g. on campsites with limited fuse protection.
Yes, you can charge this EcoFlow Powerstation with solar panels. It supports a solar input of 11-60 V, 15 A, max. 500 W and is compatible with all EcoFlow solar panels, often also with panels from other brands.
The device can be used up to around 0 % of its capacity before it switches off due to excessive discharge. The usable capacity therefore corresponds to almost the full capacity of 1024 Wh, as the device has a deep discharge protection function that triggers the switch-off at a critical charge level.
An exact specification of the switch-off capacity in Wh is not explicitly stated in the available manuals, but it is common for LiFePO4 batteries such as this one to be discharged to almost 0 % before the protection takes effect. The device switches off automatically to prevent deep discharge, which protects the service life of the battery.
For precise monitoring, we recommend using the LCD screen or the EcoFlow app, which displays the charge status and warns of critical discharge.
Yes, you can charge the Goal Zero Boulder 100 solar panel with the EcoFlow Delta 2 Power Station, provided you use the appropriate connectors and adapters. The Delta 2 supports charging via solar panels with up to 500 W input and has MPPT charge controller technology that recognises the voltage and current in real time to achieve maximum power.
The Boulder 100 delivers 100 W, which is within the charging capacity of the Delta 2. It is important that the output voltage and connection of the Goal Zero panel are compatible with the input of the Delta 2. An MC4 to DC adapter cable is usually required to connect the solar panel to the Delta 2. If you make this connection, you can use the panel to charge the Power Station without any problems.
For camping use in Switzerland, the EU version of the EcoFlow Delta 2 is usually perfectly adequate - it is equipped with Schuko sockets (type F), which can be used with a simple CH adapter (type J) without any problems.
However, if you want to connect appliances with a CH plug without an adapter, the Swiss version may be more convenient. Technically, both versions are identical, the only difference is in the socket outlet types.
Hello, I have the same thing but everything works without any problems. A friend had the same problem and he opened the part and soldered everything again. No problem for me
Yes and no.
If you charge via a microinverter then you will certainly have a power loss due to the 12V->230V->12V conversion. The Delta 2 already has its own solar charge controller which you don't need.
The Ecoflow are compatible with Shelly and are integrated. However, a PowerStream is now used for reconnection to the house.
The EcoFlow Delta 2 is charged automatically via an external 230V AC cable as soon as voltage is applied. If a solar panel is connected in parallel, the device can be charged both via the AC cable and via the solar panel. The maximum charging power via AC is 1200W, and the device can also be charged via solar panels with up to 500W.
The connection of the solar panel and AC charger allows for flexible and efficient charging, with the device automatically switching between the two sources to ensure the fastest possible charge.
When you switch on the appliance at the front, you automatically have 230V power at the sockets at the back without having to press the on/off switch at the back. The AC power button on the device activates the power supply for the 230V sockets. You can monitor and adjust the settings and status of the device via the EcoFlow app.
In the event of a warranty claim, this can be processed through us and we will send it to a licensed service centre in Switzerland.
We purchase this item from a supplier in Switzerland.