Peha Funkk

Easyclickpro Ceiling Motion Sensor

The wireless Easyclick ceiling motion sensor derives its energy from solar cells and detects movement using a 360-degree passive infrared sensor. The motion sensor is easy to install and saves energy. For example, the lighting automatically turns on when a person enters a room and automatically turns off with a delay after they leave. The motion sensor sends radio signals to the configurable Easyclick receivers or any EnOcean interfaces for building system technology.

When the brightness is below 50 Lux, battery operation (CR2032) is possible.

Technical specifications:

• Transmission frequency: EnOcean 868.3 MHz
• Detection range: approx. 12 m Ø
• Mounting height: 2-3 m
• Transmission range: approx. 25 m
• Minimum brightness: 50 Lux for automatic on/off
• Energy generator: solar cell, internal gold capacitor
• Learning start time: Learning = approx. 4 min. at 100 Lux, approx. 1.5 min. at 200 Lux
• Motion sending = approx. 6 min. at 100 Lux, approx. 3.5 min. at 200 Lux
• Test mode = approx. 5.5 hours at 200 Lux
• Full charging time: 9 hours at 200 Lux
• Charging times for operation: 3 hours per day at 200 Lux
• Operating time in the dark: approx. 48 hours
• Battery operation: approx. 1 year depending on usage frequency
• Transmission interval: immediate upon motion detection, variable every 60 seconds at 300 Lux to 300 seconds at 50 Lux, off every 10 and 30 minutes after the last motion
• EnOcean Equipment Profile: EEP A5-07-01
• Housing: PC, pearl white, similar to RAL 1013
• Protection class: IP 50
• Dimensions: 160 mm x 60 mm x 37 mm
• Weight: 125 g
• Environmental conditions: Installation only indoors, -10 ° to 40 °C, 20% to 95% relative humidity non-condensing

Suitable receivers: all Easyclickpro receivers. For daylight-dependent lighting control, a separate light sensor can be installed.