Munk Single-step ladder with back protection stainless steel 9.60m

Access ladders according to DIN 18799-1/-3, DIN 14094-1 and DIN EN ISO 14122-4: Depending on the choice of standard and the situation on site at the exit, additional components such as exit steps, railings and safety doors are required. These are not included in the complete set and must be ordered separately.Regardless of the climbing height, the following applies:;Either back protection or climbing protection can be used as fall protection (combination not permitted, as the rescue of persons is hindered by the back protection);Occupational medical examination for suitability for heights (e.g. G 41), the necessity depends on the risk assessment (e.g. total climbing height, type of protection). The necessity depends on the risk assessment (e.g. total climbing height, type of fall protection) of the respective fixed ladder systems;Proof of the load-bearing capacity of the subsoil must be checked and approved for each construction project by a responsible expert for stability;The vertical overlap of successive ladder pulls must be at least 1.680 mm;At unsecured exit points, guardrails must be fitted on both sides of the ladder or led into the exit level;Gap at exit must not be greater than 75 mm;Entry dimension: distance from entry level to first rung 100 - 400 mm. When exiting forwards, the top rung must be at the same height as the exit level;On fixed ladders with climbing protection, the free area in front of the ladder must be at least 800 x 800 mm when climbing through; ;For new installations in existing buildings, these dimensions should also be adhered to;The gap dimensions between the fixed ladder system and the guardrail must not exceed 180 mm;It must be possible to make and disconnect the connection to the climbing protection from a secure standing position. A safe place to stand is, for example, a platform with railings and safe access;To ensure that the side rails can be safely reached around, the clearance to adjacent parts around the side rails must be at least 75 mm (with the exception of components belonging to the fixed ladder system).