Munk Single-rail fixed ladder with back protection stainless steel 7.64m

Note: This item will be delivered via freight directly from the manufacturer. Please make sure to provide us with a phone number for the freight company. Furthermore, this item can only be shipped within Germany.

Application area: For maintenance and cleaning work on buildings. Special regulations apply to chimneys regarding fastening and fall protection. Regardless of the climbing height, either fall protection or climbing protection can be used (combination is not allowed, as rescue of individuals is hindered by fall protection).

A medical examination for height suitability (e.g., G 41) is required; the necessity depends on the risk assessment (including the group of people, total climbing height) of the respective ladder systems. Proof of the load-bearing capacity of the ground must be checked and approved by a responsible expert for structural stability for each construction project.

A passage barrier (safety door) is recommended. If the exit point is located near traffic routes or workplaces, a passage barrier is required. The vertical overlap of successive ladder runs must be at least 1,680 mm. At unsecured exit points, railings must be installed on both sides of the ladder or led into the exit level. The gap at the exit must not exceed 75 mm.

Starting dimension: Distance from the entry level to the first rung is 100 - 400 mm. When exiting forward, the top rung must be at the height of the exit level. For ladders with climbing protection, the free area in front of the ladder must be at least 800 x 0.8 m. For new installations in existing buildings, these dimensions should also be adhered to. The gap between the ladder system and the railing must not exceed 120 mm. The connection to the climbing protection must be made and released from a secured standing position.