Molto Mould stain stop

Covers existing mold stains. Only one application is needed. Specifically developed for the permanent covering of mold stains. Suitable for the following surfaces: plastered areas, masonry, concrete, stone, wallpaper, and surfaces painted with dispersion paints. Can also be applied directly on damp surfaces. The substrate must be solid and load-bearing, as well as free from layers that reduce adhesion, such as dust, dirt, and loose particles. Absorbent and sandy surfaces should be primed with Molto Deep Primer. Remove mold with Molto Mold Stop. Freshly plastered surfaces must dry for 7-10 days before Molto Mold Stain Stop can be applied.

Application: Knead the tube well before use, unscrew the sponge from the tube, remove the protective seal, and screw the sponge back on. Hold the tube with the sponge facing up and press until the product appears on the sponge. Dab the product onto the affected area and spread it evenly over the stain and a little beyond. Finish the application by spreading Molto Mold Stain Stop in one direction. Once the area is dry, it can be repainted. Molto Mold Stain Stop can be painted over after 12 hours. Clean the sponge with a cloth and replace the cap.