Metallkraft Electric tap GS 18

Electric tap Metallkraft GS 18, article no. 3860018

With reversing gear for time-saving, precise cutting of threads in drilled holes.

• Reversing gear enables very short machining time: pressure on the spindle starts the slow clockwise rotation of the tool, and when pulling back, the fast reverse with 680 rpm is automatically activated.

• Easy thread cutting in only one operation due to high torque, low speed, and high run-out accuracy.

• Additional handle enables optimal and comfortable tool guidance.

• Compensation of angular misalignment of the cutting tool in the bore by means of an articulated coupling between chuck holder and thread chuck.

• Depth stop as standard for blind tapped holes.

Scope of delivery:

• Universal adapter M6 - M18 with slip clutch.

• Additional handle.

• Depth stop.

• 4 mm hexagon spanner.

• Carrying case.

Length (product) approx.: 400 mm
Width/depth (product) approx.: 325 mm
Height (product) approx.: 240 mm
Weight (net) approx.: 3.15 kg
Explanation of dimensions: Additional handle in 90° position to the unit handle
Input power: 0.45 kW
Speed(s) at idle (clockwise rotation): 280 min¯¹
Speed(s) at idle (counterclockwise): 680 min¯¹
Speed(s) under load (clockwise rotation): 170 min¯¹
Speed(s) under load (counterclockwise): 410 min¯¹
Supply voltage: 220 - 240 V
Phase(s): 1
Type of current: AC
Mains frequency: 50/60 Hz
Tapping steel (S235JR) short-time operation: M18
Tapping steel (S235JR) continuous duty: M14
Thread cutting aluminium short-time duty: M18
Thread cutting aluminium continuous operation: M16
Connection cable length: 3 m
Release stall torque slip clutch: 31.4 - 34.3 Nm
Explanation of release of standstill torque of slipping clutch: Data for thread diameter M16.