Product details
Vibration sensor ATEX for vibration monitoring on fans for use in explosive environments. Protection against permanent fan overload and unplanned downtimes. Designed for connection to diagnostic electronics for vibration sensors. Wide operating temperature range and high protection class for the demands of harsh industrial environments. Compact and robust stainless steel housing with high mechanical overload resistance. Safety note: The device must be connected to the external diagnostic unit via a certified isolating barrier. Not included in the delivery. Special conditions for safe use for Group II (dust): The free cable end must be housed in a suitably dust-tight enclosure.
Article: SWEx
Rated voltage: 10 - 12 VDC
IMax: 8 mA
Protection class: IP 65
Installation location: directly on the explosion-proof MAICO fan
Material: stainless steel
Color: stainless steel
Weight: 0.58 kg
Weight with packaging: 0.68 kg
Cable length: 10 m
Width: 64.7 mm
Height: 30 mm
Depth: 25.5 mm
Width with packaging: 270 mm
Height with packaging: 210 mm
Depth with packaging: 30 mm
Ambient temperature: -55 °C to 90 °C
EX designation according to ATEX directive: Ex II 1 G / Ex II 1 D
EX designation according to standard: II 1G Ex ia IIC T4 Ga (-55°C < Ta < +90°C) / II 1D Ex ia IIIC T110°C IP65 Da (-55°C < Ta < +90°C)
Temperature class: T4
Ex approval: Baseefa12ATEX0248X / IECEx BAS 12.0133 X
Sensor type: piezoelectric sensor
Interface type: IEPE
Power supply type: external
Mounting type: screws
Measurement range vibration frequency: 2 Hz - 10000 Hz
Measurement range vibration acceleration: 50 g
Sensitivity of the vibration acceleration sensor: 100 mV/g
Physical measurement principle: vibration acceleration
Operating temperature: -55 °C to 90 °C.