Maico Hygrostat HY 230 I

Maico Hygrostat HY 230 I

Manufacturer: Maico
Designation: Hygrostat
Type: HY 230 I
With Display: no
Max. Voltage of Contacts: 230 V
Max. Contact Load: 10 A
Protection Class (IP): IP30
Explosion-Proof: no
Color: white
RAL Number: 9010
Height: 71 mm
Width: 71 mm
Depth: 27 mm

The electronic hygrostat HY 230 or HY 230 I is designed for dehumidifying or humidifying enclosed spaces. It is suitable for all residential areas and commercial spaces, including damp rooms such as bathrooms, laundry, and drying rooms. The hygrostat measures the room humidity with an internal sensor and switches the fans, heat recovery units, or humidifying/dehumidifying devices on and off depending on the set target value.

The HY 230 or HY 230 I can be mounted directly onto a flush-mounted box or installed on the wall using the surface-mounted installation kit APM HY 230. A dip switch on the circuit board allows you to set the operating mode to dehumidify (factory setting) or humidify during commissioning. The relay's switching state is indicated by a red LED in the housing.

Item: HY 230 I
Voltage Type: Alternating Current
Rated Voltage: 230 V
Output: 230 V
Mains Frequency: 50 Hz
Protection Class: IP 30
Measuring Range Relative Humidity: 20 % - 80 %
Installation Type: Surface-mounted
Material: Plastic
Color: pure white, similar to RAL 9010
Weight: 0.07 kg
Weight with Packaging: 0.08 kg
Width: 71 mm
Height: 71 mm
Depth: 27 mm
Width with Packaging: 75 mm
Height with Packaging: 80 mm
Depth with Packaging: 36 mm
Ambient Temperature: 0 °C to 50 °C
Control Element: Internal
Sensor Tolerance, Relative Humidity: 5 %
Switching Difference, Relative Humidity: 2.5 %
Max. Permissible Switching Current: 10 A / 4 A / cos phi = 1, 230 V AC / cos phi = 0.6, 230 V AC
Max. Permissible Inrush Current: 16 A
EAN: 4012799571278.