Magni Three-jaw lathe chuck DURO-M 160/3 K 4/702-2 RÖHM

Short description: The DURO-M is a manually operated chuck with a scroll and through hole. It is primarily used on conventional lathes for the machining of turned parts. Technical features: Chuck body (as well as all other components) made of steel; centric clamping via scroll; scroll forged in the die and heat-treated, thread flanks ground on both sides; jaws ground for concentricity; factory-determined zero backlash as accuracy drive; the maximum permissible speed is set so that at maximum clamping force and using the heaviest associated jaws, still 1/3 of the clamping force remains available as residual clamping force. The jaws must not protrude beyond the outer diameter of the chuck. The chucks must be in perfect condition. Furthermore, the regulations according to DIN 6386 Part 1 apply. Clamping force according to DIN 6350: The clamping force is the sum of all jaw forces acting radially on the workpiece while at rest. The specified clamping forces are guideline values. They apply to chucks in perfect condition, lubricated with Röhm grease F80. Delivery includes: Chuck, chuck key, jaws. Areas of application: Conventionally clamping horizontal and vertical lathes as well as milling machines, rotary tables, and dividing heads. Mainly used in single or small series production or repair workshops. Clamping of rotationally symmetrical parts for turning and milling operations. Advantages: High concentricity accuracy up to 0.02; jaws are fundamentally blued; minimal interference contour; high force transmission; drip edge for coolant. Further information: The Duro-M Ø160 is a manually operated 3-jaw chuck with a scroll and through hole Ø42, drilling and turning jaws, Camlock mount (ISO 702-2/DIN 55029), KK 4. It is primarily used on conventional lathes for the machining of turned parts.