kaiserkraft Barrier post

Manual retractable bollard, hot-dip galvanized. This bollard solves many blocking problems better than other posts. Ideal for streets and squares that are only temporarily open to traffic: pedestrian zones, marketplaces, parking areas, garage entrances, archways, etc. The bollard can be retracted in seconds using an above-ground hydrant key according to DIN 3223: traffic can roll over the nearly flush-mounted ground sleeve without obstruction. Total height 2050 mm, of which 1150 mm is below ground. Diameter: upper part 76 mm, lower part 100 x 100 mm. Easy installation. In case of damage, the upper part can be replaced. Manual operation: The upper part rises 50 to 80 mm out of the ground sleeve after unlocking. It is then lifted by hand until it locks automatically. When retracting, the unlocked upper part is manually pushed down. Installation note: Ensure proper drainage (gravel filling). The bollard must not be installed in standing water (e.g., groundwater). Maintenance: Important for proper function. Remove accumulated dirt at least biannually, clean all moving parts, and lubricate the locking hook.