Jessberger Electric drum/container pump set, for mineral oil products < 1000 mPas, 112

Electric drum/container pump set for mineral oil products with a viscosity of less than 1000 mPas. It has a flow rate of 112 l/min and can pump to a height of 16 m. The low pump weight makes it easy to handle, allowing for safe and fast emptying of 1000 litre IBC/CTC containers and 200 litre drums. This practical pump set is ready for immediate use.

The electric container pump set is designed for IBC/CTC tank containers and 200 litre drums, with a maximum viscosity of 1000 mPas and a maximum density of 1.9 g/cm³. It features an aluminium pump unit, NBR hose, and an aluminium nozzle with NBR seals. The drum pump motor operates at 230 V, 50/60 Hz, with a power rating of 825 W, protection class IP24, and double insulation for protection class II. It includes an overcurrent circuit breaker with a zero voltage trip and a 5 m cable with a safety plug.

The pump unit is made of aluminium with an external diameter of 41 mm and an immersion tube length of 1200 mm, allowing it to extend approximately 200 mm beyond the drum. It has a stainless steel shaft, a connection thread of G 1 1/4'', and a hose connection of 1'' (NW 25). The set includes a 2 m mineral oil hose (1'' NW 25), two stainless steel hose clamps, and one aluminium nozzle (1'' with NBR seals).

Please note: If media compatibility is unclear, please inquire about the suitability of the pumps beforehand.