Jessberger Electric drum/container pump set, for aggressive acids and slightly alkaline

Electric drum/container pump set for aggressive acids and slightly alkaline solutions, with a flow rate of 93 l/min and a maximum height of 11 m. The low pump weight makes it easy to handle, allowing for safe and fast emptying of 1000 litre IBC/CTC containers and 200 litre drums. This practical pump set is ready for immediate use.

The electric container pump set is designed for IBC/CTC tank containers and 200 litre drums, with a maximum viscosity of 600 mPas and a maximum density of 1.5 g/cm³. It features a polypropylene pump unit with an HC shaft, PVC hose, and a polypropylene nozzle with FKM seals. The drum pump motor operates at 230 V, 50/60 Hz, with a power of 640 W, protection class IP55, and double insulation for protection class II. It includes an overcurrent circuit breaker with a zero voltage trip and a 5 m cable with a safety plug.

The pump unit is made of polypropylene, with an external diameter of 41 mm and an immersion tube length of 1200 mm for IBC/CTC tank containers and 200 litre drums, extending approximately 200 mm beyond the drum. It has an HC shaft, a connection thread of G 1 1/4'', and a hose connection of 1'' (NW 25). The set includes a 2 m hose made of PVC (1'' NW 25), two stainless steel hose clamps, and one polypropylene nozzle (1'' with FKM seals).

Please note: If media compatibility is unclear, please inquire about the suitability of the pumps beforehand.