Holzkraft Wet sanding system NTS 256

Holzkraft wet sanding system NTS 256

• Sanding disc can be switched between clockwise and anti-clockwise rotation.
• Extensive range of accessories makes it easier to use the correct sanding technique, even for beginners.
• Long-lasting sanding without loss of tool hardness due to heat build-up during the sanding process, thanks to low speed and cooling water bath.
• Many holding devices available for different tools.
• Powerful induction motor with variable speed adjustment for quiet and low-vibration operation.
• Special aluminium oxide grinding stone for perfect grinding results even on hard steel over 60 HRC (tool steel).
• Removable leather honing disc for removing burrs after sharpening.
• Stripping paste for polishing the workpiece after grinding.
• Angle gauge for setting the correct grinding angle.
• Splash-proof motor and switch.

Technical data

General information:

• Grinding stone diameter: 250mm
• Grinding stone width: 50mm
• Honing disc diameter: 200mm
• Honing disc width: 30mm
• Speed: 90 - 160 min⁻¹

Dimensions and weights:

• Length (product) approx.: 460mm
• Width/depth (product) approx.: 340mm
• Height (product) approx.: 410mm
• Weight (net) approx.: 14.2kg

Electrical data:

• Input power: 0.15kW
• Supply voltage: 230V
• Mains frequency: 50Hz

Expert information:

• Sound pressure level: 77 dB(A)
• Output power: 0.09kW
• Drive motor protection class: IP44
• Rated operating mode drive motor: S1
• Motor speed: 1790 min⁻¹
• Total power consumption: 1.38A.