Hettich Attaccaglia per pensili SAH130

Cover caps for SAH 215 / SAH 216- Drill hole diameter 15 mm - White plasticInstructions for the load-bearing capacity of cupboard hangers and accessories- The following principles must be observed with regard to the load-bearing capacity of cupboard hangers and accessories:- Both the furniture construction and the material and manufacturing quality of the furniture are beyond our control.- We also have no influence on the quality of the wall materials: - The suspension hooks we offer in conjunction with dowels are intended for use in solid bricks, sand-lime bricks, concrete or clinker bricks. A hole with a diameter of 8 mm must be drilled into the solid stone material, into which the plastic dowel is driven flush. The minimum hook screw-in depth corresponds to the hook length minus 10 mm.- For fastening to other wall materials, the commercially available special fastening elements must be used.- Dowels and screws must be matched to each other. Dowel screws must not be replaced by normal chipboard screws.- Fastening of hanging rails:- with 2 special screws Ø 5.5 x 50 mm in the area of each cupboard hanger- from a cupboard width of 900 mm, an additional special screw Ø 5.5 x 50 mm must be placed in the centre behind each cupboard (type A, type B and type H).- It is the responsibility of the furniture manufacturer/dealer to ensure that the furniture placed on the market complies with the requirements of EN 14749.