Hammerite Metal protective lacquer SE

Hammerite Direct-to-Rust Metal Protection Paint is a primer, undercoat, and topcoat in one. Dualtech provides double protection: water beads off and rust is stopped, allowing the metal to remain durable for longer.

Preparation: Sand smooth surfaces, remove loose rust and peeling old paint with a wire brush. Clean dirt, dust, and grease residues with diluted cleaning agent. Rinse with clear water and allow to dry thoroughly. Apply Hammerite Direct-to-Rust Metal Protection Paint to a small, already painted area and let it dry for 1 hour. If there is no reaction, apply Hammerite Direct-to-Rust Metal Protection Paint to the entire surface. If a reaction occurs, remove all old paint before application. For bare zinc, aluminum, and galvanized surfaces, treat the respective surfaces with Hammerite Special Adhesion Primer before application.

Application: Brush application. Ideal processing temperature is between 11°C and 25°C. Stir lightly before use. Apply undiluted. On pre-painted metal surfaces in good condition, one coat is sufficient. On bare, rusty metal, two coats are required. Ensure that all corners and edges are well covered. Do not apply too heavily, as this may lead to running.