Hager HAG ZB54W Cooling cabinet H=1400 4F IP54

Meter cabinet, univers Z, 1400x1050x205 mm, protection class II, 432 space units. Cabinet housing according to DIN VDE 0603/1, standard size DIN 43 870 for surface-mounted, flush-mounted, or partially recessed installation. Designed for the construction of a meter distribution system up to 355 A, rated voltage 230/400 V 50 Hz. Protection class IP31 (IP44/IP54 according to DIN VDE 0470/1), protection class II with protective insulation, protection class IP3X behind the door. Composed of a cabinet with a door made of powder-coated, baked, sturdy profiled 1 mm thick steel sheet. Interior lining completely made of plastic. Cable entries at the top and bottom through built-in plastic flange plates, rear pre-forming in the plastic part, and side-mounted plastic flange plates in the area of the NAR (suitable for busbar entry), RfZ (only with a height of 1100 mm), and AAR. Door flush with the front with internal adjustable hinges, optionally hinged on the right or left with a 110° opening angle. Door lock with a latch, from a width of 800 mm and for all cabinets with a height of 1250 mm and above with a rod lock featuring a three-point locking system. Door lock can be replaced with other locking mechanisms. Cabinets can be flanged together side by side and stacked on top of each other. Cabinet size ranges from 1 to 5 fields with 72 to 540 space units (PLE). Note: Always use a connection set (accessory) for cabinet-to-cabinet connections. In the AAR area, the plastic flange plate can be removed, and optionally a SCHUKO socket or a CEE socket can be installed.