Glutz Multi-point locks MINT 18957 for E-fittings

Galvanized steel, automatic latch and bolt blocking after lever actuation, reversible steel latch for left and right, hardened steel main bolt 8x30 mm, 2 hardened steel swivel hook bolts 8 mm, with change, with forced nut, without strike plates.

The high-quality mechanical multi-locking system with integrated latch and bolt blocking is designed for use in entrance doors of houses and apartments under challenging climatic conditions or increased door sealing pressure. It is intended for use exclusively in conjunction with electronic protection fittings, where the lever movement occurs upwards and downwards. By operating the outside lever upwards, the lock bolts are shot out and blocked. Subsequently, the actuation of the electronic fitting with the appropriate medium blocks the lever. The door is completely locked. The door can be opened through identification at the electronic fitting. By moving the lever downwards, the lock is released. An emergency opening is possible via the cylinder/change function.

The cylinder screw is not centered from the edge. To determine the cylinder lengths: center of the edge = center of the lock cylinder. No reduction sleeves for the lock nut/spindle are permitted. No knob cylinders are allowed. When using a standard cylinder, the key must always be removed.