Fischer Inject.threada. FIS GS M8x110 K

The Fischer threaded rod FIS GS is an economical system component without approval for use with Fischer injection mortars. Depending on the injection mortar used, the threaded rods made of galvanised steel enable a wide range of applications in different building materials. The system is particularly suitable for economical fixing in interior areas for which no approval is required. Advantages: The grid structure of the injection anchor sleeve FIS H K is matched to the injection mortar FIS V Plus, multifunctional mortar, installation mortar FIS VL and installation mortar Green and ensures economical mortar consumption with optimum positive locking. The centring wings ideally align the fastening element in the anchor sleeve and enable the use of different anchor rod diameters. The barbs hold the anchor sleeve firmly in the drill hole, thus enabling problem-free overhead installation. The geometry of the anchor sleeves allows the bridging of non-load-bearing layers for convenient and simple installation. Please observe the approvals of the respective injection mortar. Applications: Anchoring in perforated brickwork with FIS V injection mortars. Functionality / installation: The FIS H K anchor sleeve can be used with FIS V, FIS V High Speed and FIS V Low Speed injection mortars, depending on the application. FIS P can be used without approval. The system is suitable for push-in installation in conjunction with injection anchor sleeves and FIS A anchor rods or FIS E internally threaded anchors. The anchor sleeve is inserted into the drill hole and filled with injection mortar from the base of the anchor sleeve. When the fastening element is screwed in, the mortar is pressed through the grid structure of the anchor sleeve and adapts optimally to the anchoring base. The load is transferred via positive locking.