Fischer 508014, Expansion anchor, Concrete, M12, ETA-07/0211, ETA-18/0101, ETA-18/0101, 86 mm, 1.2 c

The Fischer bolt anchor FBN II K is a steel anchor designed for economical fastening in uncracked concrete. In its short version, it is suitable for pre-insertion and through-insertion installation. Made of hot-dip galvanized steel, the bolt anchor is recommended for railings, handrails, or brackets.

Advantages: The standard anchoring depth achieves the highest load capacities. This results in fewer fastening points and smaller anchor plates being required. The reduced anchoring depth decreases the drilling depth, which reduces installation effort and increases flexibility. The long thread allows for compensation of component tolerances and spacing installations, thereby enhancing flexibility. A few hammer blows and minimal tightening slip ensure noticeably easy installation. The impact pin protects the thread from damage, facilitating time-saving assembly and disassembly of the attachment.

Applications: Steel constructions, railings, brackets, ladders, cable trays, machines, stairs, gates, facades.

Approved for: Concrete C20/25 to C50/60, uncracked. Also suitable for: Concrete C12/15, natural stone with a dense structure.

Functionality: The FBN II is suitable for pre- and through-insertion installation, and conditionally for spacing installation. Before installation, position the hex nut optimally (the impact pin protrudes about 3 mm from the hex nut). When applying the torque, the cone bolt is pulled into the expansion clip and tensions it against the borehole wall. The head marking allows for easy verification of the anchoring. For series installation, we recommend using the bolt anchor setting tool FABS.