Fahrion Gewindeschneidfutter, ER-Synchro 8

Design: Extremely low axial forces for minimal flank pressure and perfect surface quality. Torsion dampers and compensation mechanisms in the circumferential direction. Depths of up to 150 mm achievable with a 10 mm interference contour (for thread sizes M0.5-M3). Suitable for internal coolant supply up to 80 bar. Compatible with taps and thread formers. Suitable for both right-hand and left-hand threads. Applicable for blind and through holes. Minimal length compensation in both compression and tension directions. Significantly reduces flank pressure in both old and new CNC machining centers. Note: Products No. 338131 – 338135 are to be used only with CENTRO/P collets (No. 309365– 309372). The weaker the axial force, the better the quality, lower the wear, longer the tool life, and safer the process. CP roller wrench No. 309754 or CP torque roller wrench No. 309756 must be purchased separately. Delivery includes: Spanner wrench. Advantage: Safe processes due to smooth operation even under torque load. Longer tool life for taps and thread formers. Significantly smaller outer diameter than previously available. Considerably more internal cooling directly at the tool compared to conventional synchronous chucks (for ER8). Twice the runout accuracy for the lowest flank pressure. Damped direction reversal for reduced tool breakage.