eurokraft pro Mobile and lowerable workbench

Mobile and lowerable workbench, Series 8000 frame construction. It features a wheeled base that can be extended and retracted using an eccentric lever. The maximum load is up to 1250 kg when stationary. The workbench is easy to move due to the extending wheeled base. It has a solid worktop made of beech boards with wedge-shaped dovetailing and can be optionally upgraded with a modular system at the rear, including a perforated wall, shelves, lighting, etc.

The solid beech worktop is 40 mm thick and has surface protection provided by environmentally friendly Danish oil. The worktop depth is 700 mm. The system base frame is a four-leg welded frame with two pairs of frame feet made of profiled steel tubing (45 x 45 x 2 mm), including cross braces at the top and bottom. It is powder coated in light grey RAL 7035. The frame feet at the bottom have an end element with a non-slip stud for stable footing. The wheeled base is installed at the bottom with an eccentric lever on the right. The operation of the eccentric lever is only possible up to a maximum load of 300 kg. The wheeled base can be retracted and extended using the eccentric lever and features two fixed and two swivel castors (castor diameter 100 mm, overall height 125 mm, tread made of non-marking thermoplastic rubber, 85° shore, wheel body made of polypropylene). Fixed castors are installed on the left side, while swivel castors are on the right side and secured using a wheel plate. A bar handle/push handle is included. The maximum distributed load is 1250 kg (or a maximum of 450 kg when the wheeled base is extended). The workbench is delivered fully assembled.

A large range of accessories such as drawer dividers and modular systems for the rear, as well as other types of worktops, are available.