Eltako Bus push-button coupler for feedback LED FTS61BTKL (30014074)

Eltako Bus Button Coupler FTS61BTKL

Manufacturer: Eltako
Designation: Bus button coupler for feedback LED
Type: FTS61BTKL
KNX Bus System: no
KNX Radio Bus System: no
Radio Bus System: yes
LON Bus System: no
Powernet Bus System: no
Other Bus Systems: others
Bidirectional Radio: yes
Mounting Type: Flush-mounted
Number of Activation Points: 1
Mounting Method: Clamp mounting
Protection Class (IP): IP20
Minimum Depth of Device Box: 18 mm

The Eltako Bus Button Coupler FTS61BTKL is a bus button coupler for 4 conventional buttons with integrated 24V LEDs for connection to button gateways FTS14TG via a 2-wire button bus. The standby loss is only 0.2 watts.

The dimensions are 45 mm long, 45 mm wide, and 18 mm deep. Up to 30 bus buttons and/or bus button couplers FTS61BTKL can be connected to the terminals BP and BN of a button gateway FTS14TG. The permissible total cable length is 200 m. The RLC element included with the FTS14TG must be additionally connected to the terminals BP and BN at the furthest bus button or bus button coupler.

The power supply for the connected FTS61BTKL is provided via the 2-wire button bus with 29V DC while simultaneously transmitting data. Only standard bus or telephone cables should be used. Up to four conventional buttons T1-T4 can be connected to the 15 cm long connection cables. The opposite pole is T0. The connection cables can be extended up to 2 m.

The integrated 24V LEDs in the buttons display confirmation telegrams from actuators when the IDs of the actuators are entered into the ID table of the FTS14TG with PCT14.

Warning! Do not apply voltage. The pairs T1/T3 and T2/T4 can be defined as direction buttons. The bus is connected to BP and BN. Observe polarity!

EAN: 4010312316801.