Eltako Blister Pack Switching BPS55-L62

Blister pack with wireless switch F2T55E-wg and light actuator FL62-230V. Smart home sensor and smart home actuator. F2T55E-wg: Wireless 2-channel switch in E-design 55, dimensions 80x80 mm externally, frame inner dimension 55x55 mm, height 15 mm. Generates energy for wireless telegrams even when the button is pressed, therefore no connection cable and no standby loss. With rocker switch. A wireless switch with one rocker can send two evaluable signals: press the top rocker and press the bottom rocker. The mounting plate can be screwed onto a flat surface or attached to the wall, glass, or furniture using the included adhesive film. Above a 55 mm switch box, the existing sleeves in the box are used for screw fastening. FL62-230V: Wireless light actuator 10A/250V AC. Pulse switch with 1 normally open contact, potential-free. Suitable for 230V LED lamps and ESL up to 200W, 230V incandescent and halogen lamps up to 1000W. For flush mounting. Dimensions 49x51 mm, depth 20 mm. Standby loss is only 0.4 watts. The connection terminals are plug terminals for conductor cross-sections from 0.2 mm² to 2.5 mm². With the convenient tap technology, up to 32 wireless universal switches, wireless directional switches, wireless central control switches, and motion sensors can be learned. Bidirectional wireless can be activated. Distance between control connections/contact is 6 mm. Supply, switching, and control voltage locally 230V. In the event of a power failure, the switching position is retained. When power is restored, it is defined as switched off. After installation, wait for the automatic short synchronization before connecting the switched load to the power supply. In addition to the wireless control input via an internal antenna, this wireless actuator can also be locally controlled with a possibly previously installed conventional 230V control switch. A glow lamp current is not permitted.