Dormakaba GSR-EMF-1G/VL XEA for TS 98 XEA white P100 bands.

With electromechanical hold-open for TS 98 XEA in XEA design, this product ensures the correct sequence when closing two-leaf doors with individual hold-open of the door leaves. The hold-open point can be set to an opening angle between 80° and 130°. Note: the locking point is at the same time maximum. In the event of an alarm or power failure, the hold-open is cancelled, and the door is closed by the door closer. The door closer is controlled via external smoke detection control panels. Due to the adjustable equipping force (without tools), the door can be opened and closed by the door closer. The hold-open can also be triggered manually without any problems due to the adjustable disengagement force (no tools required).

Mounting is on the hinge side. For doors where the hold-open point is to be above 130°, we recommend using EM holding magnets instead of the electromechanical hold-open.

Operating voltage EMF: 24 V DC
Power consumption EMF 1: 1.4 W
Power consumption EMF 2: 2.8 W
Duration: 100% DC
Triggering torque: adjustable

Proof of suitability: The TS 98 XEA GSR-EMF 1, EMF 2, and EMF 1G are approved by the German Institute for Building Technology, Berlin, with all well-known smoke detection systems by the building authorities, acceptance test mandatory.

Design for door widths: V= 1350-2500 mm, VK= 1220-1350 mm, VL= 2500-3200 mm.

Further technical features: Duty cycle ED: 100%.

Delivery without door closer; please order separately.