Devi Thin-bed set 225 W, 1.5 sqm 140F1651 with WLAN thermostat

Danfoss Thin Bed Set 225W 140F1651

Manufacturer: Danfoss
Designation: Thin Bed Set 225W
Type: 140F1651
With carrier mat: yes
Heating cable fixation: glued
Self-adhesive: yes
Connection power: 0..225 W
Power: 150 W/m²
Heating cable load: 11 W/m
Number of cold leads: 1
Length of cold leads: 4000 mm
Suitable for wet rooms: yes
Suitable as outdoor heating: no
Suitable as roof heating: no
Area: 1.5 m²
Length: 3000 mm
Width: 500 mm
Thickness: 3.5 mm
With controller: yes
With room thermostat: yes
With floor temperature sensor: yes

Danfoss Thin Bed Set 225W 140F1651: additional details
Thin bed set with Wi-Fi thermostat, flexible sensor protection tube DN10 with red cap, plastic nails, installation instructions. The self-adhesive thin bed heating mat with a connection cable is pre-assembled and specifically designed for installation in leveling compound or flexible adhesive directly beneath the floor covering. Due to its low installation height of only 3.2 mm, it is ideal for renovating and modernizing bathrooms, showers, kitchens, etc. This floor heating system is particularly suitable for retrofitting in awkward and/or large spaces, as the return of the second connection is not necessary. The heating cable, with additional protective sheath for the use of RCD protection, is applied to a plastic mesh. The length of the connection cables is 4.0 m.

Cold lead: 1 x 4m, 1.0mm²
Voltage: 230 V
Rated limit temperature: 120°C
Specific heating power: 150 W/m²
Length load: 11W
Insulation: PVDF / FEP
Resistance tolerance: +10% / -5%
Minimum installation temperature: 5°C
Minimum bending radius: 6 x dA
Calculation width: 50 cm
Delivery width: 48 cm
Mat height: 3.2 mm
Protection class: IPX7
Approval: EN 60335-2-96
Area: 1.5 m²
0.5 x 3.0 m.