Devi Thin-bed set 1500 W, 10,0qm 140F1662 with WLAN thermostat

Danfoss Thin Bed Set 1500W 140F1662

Manufacturer: Danfoss
Description: Thin Bed Set 1500W
Type: 140F1662
With carrier mat: yes
Fixation of heating cable: glued
Self-adhesive: yes
Connection power: 0..1500 W
Power: 150 W/m²
Heating cable load: 11 W/m
Number of cold leads: 1
Length of cold leads: 4000 mm
Suitable for wet rooms: yes
Suitable as outdoor heating: no
Suitable as roof heating: no
Area: 10 m²
Length: 20000 mm
Width: 500 mm
Thickness: 3.5 mm
With controller: yes
With room thermostat: yes
With floor temperature sensor: yes

Danfoss Thin Bed Set 1500W 140F1662: additional details
Thin bed set with Wi-Fi thermostat, flexible sensor protection tube DN10 with red cap, plastic nails, installation instructions. The self-adhesive thin bed heating mat with a connection cable is pre-assembled for installation and has been specifically designed for embedding in leveling compound or flexible adhesive directly beneath the floor covering. Due to its low installation height of only 3.2 mm, it is ideal for renovating and modernizing bathrooms, showers, kitchens, etc. This floor heating system is particularly suitable for retrofitting in awkward and/or large spaces, as the return of the second connection is not required. The heating cable, with additional protective sheath for the use of RCD protection, is applied to a plastic mesh. The length of the connection cables is 4.0 m. Cold lead: 1 x 4m, 1.0mm², Voltage: 230 V, Rated limit temperature: 120°C, Specific heating power: 150 W/m², Length load: 11W, Insulation: PVDF / FEP, Resistance tolerance: +10% / -5%, Minimum installation temperature: 5°C, Minimum bending radius: 6 x dA, Calculation width 50 cm, Delivery width: 48 cm, Mat height: 3.2 mm, Protection class: IPX7, Approval: EN 60335-2-96, Area 10.0 m², 0.5 x 20.0 m.