Devi Thin-bed set 1200 W, 8,0qm 140F1660 with WLAN thermostat

Danfoss Thin Bed Set 1200W 140F1660

Manufacturer: Danfoss
Description: Thin Bed Set 1200W
Type: 140F1660
With carrier mat: yes
Fixation of heating cable: glued
Self-adhesive: yes
Connection power: 0-1200 W
Power: 150 W/m²
Heating cable load: 11 W/m
Number of cold leads: 1
Length of cold leads: 4000 mm
Suitable for wet rooms: yes
Suitable as outdoor heating: no
Suitable as roof heating: no
Area: 8 m²
Length: 16000 mm
Width: 500 mm
Thickness: 3.5 mm
With controller: yes
With room thermostat: yes
With floor temperature sensor: yes

Danfoss Thin Bed Set 1200W 140F1660: additional details
Thin bed set with Wi-Fi thermostat, flexible sensor protection tube DN10 with red cap, plastic nails, assembly instructions. The self-adhesive thin bed heating mat with a connection cable is pre-assembled and specifically designed for installation in leveling compounds or flexible adhesives directly beneath the floor covering. Due to its low installation height of only 3.2 mm, it is ideal for renovating and modernizing bathrooms, showers, kitchens, etc. This floor heating system is particularly suitable for retrofitting in awkward and/or large spaces, as the return of the second connection is not required. The heating cable, with additional protective sheath for the use of RCD protection, is mounted on a plastic mesh. The length of the connection cables is 4.0 m. Cold lead: 1 x 4 m, 1.0 mm², Voltage: 230 V, Rated limit temperature: 120 °C, Specific heating output: 150 W/m², Length load: 11 W, Insulation: PVDF / FEP, Resistance tolerance: +10% / -5%, Minimum installation temperature: 5 °C, Minimum bending radius: 6 x dA, Calculation width: 50 cm, Delivery width: 48 cm, Mat height: 3.2 mm, Protection class: IPX7, Approval: EN 60335-2-96, Area 8.0 m², 0.5 x 16.0 m.