Danfoss Thin bed heating mat DTIF 140F0450

DEVImat (DTIF) self-adhesive thin-bed heating mats are designed for laying in tile adhesive or leveling compound. These thin-bed heating mats feature a PTC resistor and serve as a floor temperature control system for embedding in leveling compound or flexible adhesive beneath the floor covering. The special heating cable, which includes an integrated return conductor and shield, is fixed on a self-adhesive glass fiber fabric and has a diameter of 3.2 mm.

Consisting of:

• 1 self-adhesive thin-bed heating mat, DEVImat, 100/150 W/m², IP X7, 1 x 4 m PTC resistor
• 1 sensor tube DN 10

Technical data:

• Voltage: 230 V
• Specific power: 100/150 W/m²
• Nominal temperature: 120° C
• Cold conductor: 4 m DTWB, 2 x 1.0 mm²
• Minimum laying temperature: -5° C
• Insulation: PVDF/FE
• Smallest bending radius: 6 x cable diameter
• Resistance tolerance: +10% / -5%
• Calculation width: approximately 50 cm
• Delivery width: approximately 48 cm
• Approval: EN 60335-2-96
• Protection class: IPX7

Application:

• Thin-bed heating

Power supply:

• Voltage: 230 V
• Power supply: 525 - 525 W
• Power: 150 W/sqm
• Heating conductor load: 11 W/m

With support mat: Yes
Fixing of the heating conductor: Adhered
Number of PTC thermistors: 1
Length of PTC thermistors: 4000 mm
Suitable for damp rooms: Yes
Suitable for open space heating: None
Length: 7000 mm
Suitable for roof heating: None
Width: 500 mm
Surface area: 3.5 sqm
Thickness: 3.5 mm
With controller: None
With room thermostat: None
With floor temperature sensor: None
Self-adhesive: Yes.