AKCP TMP00-NIST2 - Temperature sensor

1.5 m extendable temperature sensor. The NIST2 sensors feature a built-in calibration check. Each device has 2 NIST-calibrated and certified temperature sensors. The value of the primary sensor is verified by the secondary sensor. If a range is detected that is greater or less than the specified threshold, a warning is issued. This makes these sensors ideal for situations where a high level of accuracy is required and the safety of the calibration state is ensured. NIST2-certified, calibrated temperature sensors are compared for accuracy once per second. Not compatible with sensorProbe (2, 4, 8), DCU, CCU, and E-IS8. Only compatible with securityProbe5E with current firmware. The 40 ft version can only be used on the first 4 sensor ports of SP1+ / SP2+ / SPX+. Can be extended up to 500 ft with CAT5 cable. The standard sensor tube for all TMP sensors is 30 mm long and has a diameter of 10 mm. Sensor tubes are available in lengths of 100 mm and 50 mm with a diameter of 7 mm. Note: These sensors are not supported by sensorProbe, DCU, CCU, and E-IS8. These devices and older sensorProbes should use the THS sensors. Suitable for: SP1+ Basic, SP1+ Professional, SP2+ Basic, SP2+ Professional, SP2+ Basic LCD, SP2+ Professional LCD. Package includes: AKCP - TMP00-NIST2.