Aircraft Oil-water separator WOS 1

Oil-Water Separator Aircraft WOS 1, Item No.: 2058210

Patented Technology

• Thanks to patented technology, regular service can be performed in just 30 seconds without extensive cleaning.
• Wall and floor mounting options available.
• Works reliably with any condensate separator.
• Suitable for all common compressor oils.
• Operating media: condensate (air, water, oil), non-aggressive, not suitable for emulsions.
• Quick and clean replacement of the filter cartridge.
• No settling tank required (no bacteria formation).
• Easy installation due to compact design and small dimensions.
• Connection via quick couplings.

Function Description:

• Multi-stage oil-water separation using an oil-attracting filter and activated carbon.
• At the end of the filter element's service life, it is unscrewed and completely disposed of.
• The filter element is tightly sealed with a plastic cover, allowing residual condensate to remain inside.
• The sealed filter element can be disposed of according to applicable regulations.

Service Interval:

• After the occurrence of one of the following three cases:
• 4,000 operating hours of the compressor with compressor oil transfer of 2.5 mg/m³.
• Discoloration of the polypropylene medium - analysis performed through simple visual inspection.
• No later than 12 months (regardless of the compressor's operating hours).

Max. Oil Capacity: 0.84 l
Max. Residual Oil Content: < 20 ppm
Max. Condensate Flow: 0.90 l/h
Operating Temperature: 1.5 – 45 (max. 65) °C
Length (Product) approx.: 483 mm
Width/Depth (Product) approx.: 146 mm
Height (Product) approx.: 106 mm
Condensate Inlet Connection: 8 mm
Water Outlet Connection: 8 mm
Max. Compressor Performance: 1.08 m³/min
Explanation of Maximum Compressor Performance: These performance specifications apply to temperate climate zones.