AGT Digital 4in1 moisture detector with non-invasive measurement

Simply apply and measure: Easily detect areas in your building materials that are too damp. Thanks to the sensor panel, you can measure the moisture without penetrating the material.

Suitable for various building materials: Test the condition of furniture and wood that is to be processed. Measure the moisture content of hardwood and softwood as well as that of drywall and masonry.

Convenient to read and record: You can read the measured values on the illuminated LCD display as digits, which are also displayed as LED bars. For easy noting, such as for serial measurements, hold the display at the touch of a button.

Audible and visual alarm: If the measured moisture exceeds the preset maximum value, you will be warned immediately, ensuring that you do not miss any damp spots.

Ideal for checking building materials, furniture, cladding, and much more.

Non-invasive measurement via sensor panel on the back: Simply place it against the surface without damaging it.

Green backlit LCD display shows moisture, measurement mode, and battery status.

Measures four building materials: hardwood, softwood, drywall, and masonry (ceilings and walls).

Moisture measurement ranges: drywall and masonry 0-70%, hardwood 0-35%, softwood 0-53%.

Display of the measured value in percent and by scale: on the LCD display as well as by bar display with three green, yellow, and red LEDs each.

Acoustic and visual alarm when the maximum moisture value is exceeded (70% for drywall and masonry, 17% for wood): by beep and LED bar.

Record measured value at the push of a button: for noting down serial measurements.

Maximum measuring depth: 20 mm.

Easy-grip, shock-resistant housing with rubberized sides.

On/off switch and control buttons on the front panel.

Automatic switch-off after 2 minutes when not in use.

Power supply: 1 battery type 9 volt block (please order separately).

Dimensions: 73 x 165 x 28 mm, weight: 150 g.

Moisture detector including manual.