Best RRP products in the Mudguards category
On this page you'll find a ranking of the best RRP products in this category. To give you a quick overview, we've already ranked the most important information about the products for you.
1. RRP ProGuard
The ProGuard is their amazing new line of front and rear mudguards for mountain bikes, offering unparalleled protection against mud and spray. It is perfect for trail, enduro, or downhill racers and essential for the weekend warrior seeking the best protection. The design goal was to increase tire clearance, improve fit, and reduce issues with mud contamination that occur with this type of mudguard. The Mini offers a very compact design for year-round protection, the Standard provides excellent protection in a shorter, more compact design, while the longer Max Protection version (21 mm longer at the front than the Standard and 68 mm longer at the rear) offers incredible, unmatched protection. Suitable wheel sizes: 29''.
2. RRP ProGuard Standard
RRP ProGuard Family
Plain black
The ProGuard is our amazing new range of front and rear mudguards for disc brake mountain bikes, offering unmatched protection from mud and spray. It's perfect for trail, enduro, or downhill racers and essential for the weekend warrior looking for the very best protection. Our design intent was to increase tire clearance, improve fit, and reduce the mud clogging issues seen with this type of mudguard. The Mini offers a very compact design for all-year-round protection, the Standard offers superb protection in a shorter, more compact design, whereas the longer Max Protection version (21mm longer at the front than the Standard and 68mm longer at the rear) offers incredible unmatched levels of protection.
ProGuard Velcro/Cable Tie
Slots and holes for both cable tie or our new Velcro attachment option (sold separately). Velcro straps have silicone impregnated on the inside of the strap for a solid grip on the lower legs while protecting them. Rubber pads adhere to the sides and top to protect the fork and significantly improve stability. A side recess in the main guard increases clearance from the top crown arch on bottom out. There is a slight increase in seal shield size for improved protection over the bolt-on design. The easy clean matte textured finish features gloss highlights as seen on the bolt-on. Small enough to fit and forget for all-year-round use. The existing ProGuard Standard, Max Protection, and rear have been updated to include the listed features below.
Available in 3 sizes:
Mini: 390mm long - 104g (without Velcro/cable ties)
Standard: 494mm long - 119g (without Velcro/cable ties)
Max Protection: 582mm long - 133g (without Velcro/cable ties)
Compatibility:
Wheels: 26, 27.5, 29
Tyres: Up to a 3 tyre
Forks: All forks including Boost forks (except reverse arch)
Travel: Any travel.
3. RRP ProGuard- Front Bolt On V2 Mini
Delivery date currently unknown. ProGuard Front Bolt On V2
The ProGuard Bolt On V2 is the ultimate protection against mud, dirt, and water. With more sizes and fork compatibility, you can customize your bike like never before. Enjoy increased ground clearance, vertical adjustability, stability, and seal protection. A central cutout provides more clearance, angled side cutouts offer additional space at the CSU arm, and newly profiled mounts ensure maximum adjustability. Furthermore, with larger seal shields, super-sticky rubber pads, and longer bolt slots, you can enjoy the ultimate riding experience.
New V2 weights
Max protection: 137 g
New adapter and stability mounts
There are 6 new mounts for the Bolt On V2 listed below, some come with custom screws:
- FOX 34 (Hollow Brace) non-step cast adapter mount
- FOX 34 (Hollow Brace) step-cast adapter mount
- RockShox Zeb / Domain adapter mount
- RockShox Lyrik / Pike adapter mount
- Öhlins RXF38
- Ext Era / XFusion Trace36 adapter mount
New screw packs
There are 5 new Bolt-Pack products of version 2. Most have been redesigned or are completely new and may therefore not be compatible with version 1. Please see below for which versions they apply to:
- Bolt v1 & v2 bolts for FOX & Marzocchi (2 x M3 x 10.5 mm)
- Bolt On v2 bolts for Zeb / Domain / Lyrik / Pike (1 x M3 x 16 mm)
- Bolt On v1 & v2 bolts for Öhlins (3 x M4 x 10 mm)
- Bolt On v1 & v2 bolts for Öhlins RXF34 connection set (M4 x 8 mm / M4 x 14 mm sleeve), previously known as sleeve pack and unchanged; this has been removed from the fender pack and sold separately
- Bolt On v2 bolts for Ext Era / XFusion (2 x M5 x 12 mm)
- Bolt On v2 bolts for SR Suntour / Rocksox / XFusion (1 x M6 x 12 mm)
User manual
Installation instructions and product details.
4. RRP ProGuard- Front Bolt On V2
All bolts are specially designed for maximum clamping stability, uniformity and the most secure fit (only a 3mm Allen key required). This is extremely expensive but necessary as commercial options did not meet the standards. The following screws are supplied in the packaging:
M3 x 2 (FOX / MARZOCCHI)
M4 x 3 (ÖHLINS)
M6 x 1 (SR SUNTOUR)
The following bolts are supplied with some of the adapter brackets listed below (sold separately):
M3 EXTRA LONG x 1 (ZEB / DOMAIN / LYRIK / PIKE ADAPTER BRACKETS)
M4 LONG x 1 (RXF34 MOUNTING KIT & DVO DIAMOND)
M5 x 2 (EXT ERA / XFUSION)
5. RRP ProGuard Max
The ProGuard is their amazing new line of front and rear mudguards for mountain bikes, offering unparalleled protection against mud and spray. It is perfect for trail, enduro, or downhill racers and essential for the weekend warrior seeking the best protection. The design goal was to increase tire clearance, improve fit, and reduce issues with mud contamination that occur with this type of mudguard. The MINI offers a very compact design for year-round protection, the STANDARD provides excellent protection in a shorter, more compact design, while the longer MAX PROTECTION version (21 mm longer at the front than the STANDARD and 68 mm longer at the rear) offers incredible, unmatched protection. Weight: Front: 133 g. Dimensions: Profile width front (max.): 76 mm, mudguard length front: 582 mm. Key information: Application area: MTB, design: zip tie, type: front mudguard, suitable wheel sizes: 26''.
6. RRP ProGuard - Hook and Loop
RRP ProGuard Accessories
Hook and Loop Pack
The ProGuard Hook and Loop Packs add easy convenience to fitting and removing your ProGuard mudguard (where compatible). Any ProGuard that has the slots for these hook and loop straps is compatible.
The Hook and Loop Pack and rubber pads have the added bonus of our super tacky rubber pads, which you can fit to all front ProGuards of any version. These rubber pads will grip your fork, adding significant stability while also protecting the fork from any rubbing.
Options available:
Front
PGVP Hook and Loop Pack: 8 hook and loop straps
PGVPR Hook and Loop and Rubber Pads Pack: 8 hook and loop straps with 4 super tacky rubber pads
Compatibility:
Hook and Loop: All ProGuard v2 front mudguards and the new ProGuard MINI
Rubber Pads: All ProGuard front mudguards (any version), including the new ProGuard MINI.
7. RRP standard rear mudguard proguard
A longer version of the current ProGuard Rear Mini, offering more coverage—83mm longer at the rear and 140mm longer at the front.
It comes with 7 cable ties and 3 strips of transparent 3M protective tape to be placed on the frame.
Three rubber pads provide exceptional grip and stability, eliminating frame rubbing.
It uses high-impact polypropylene material finished in a matte surface texture with a glossy sheen, similar to other ProGuards.
Fits all ATV forks with wheel sizes of 66 cm, 69.8 cm, and 73.7 cm, with tires up to 7.6 cm wide.
8. RRP ProGuard Bolt On Mini
The ProGuard Bolt On is the premier large, directly mounted fender of its kind, offering exceptional protection with the sleekest look available straight from the factory. There are no zippers or Velcro straps to ruin the clean lines of your bike, as it is secured with bolts (included). We also provide tilt mounts that allow you to precisely adjust the angle of the fender. You can tilt the front/back by a few millimeters using 2 mounts (included). Stickers for ProGuard Bolt On Avant.
9. RRP ProGuard Bolt On
The ProGuard Bolt On is the first large, directly mounted fender of its kind. It offers exceptional protection with the sleekest look available straight from the factory. There are no zippers or Velcro that ruin the clean lines of your bike, as it is secured with screws (included). We also have tilt mounts that allow you to finely adjust the angle of the fender. With 2 mounts (included), you can tilt the front/rear axle by a few millimeters. Stickers for ProGuard Bolt On Front.
10. RRP ProGuard - Bolt Packs
RRP ProGuard Accessories
Bolt On Bolt Packs
ProGuard Bolt On - Bolt packs
This direct mount mudguard is designed for the forks listed below that have the THREADED HOLES in the rear of the fork brace:
* FITS FOX 32, 34, 36, 38, *40 (2021) 49
* FITS NEW MARZOCCHI FORKS (FOX chassis only)
* FITS OHLINS FORKS
* FITS SR SUNTOUR FORKS** *doesn't fit FOX 40 in 26" or 27.5" without our adapter bracket - fits 2021 versions
**Some SR SUNTOUR forks have an unthreaded straight through hole in the centre of the fork brace, you can purchase a SLEEVE PACK to allow the PROGUARD Bolt On to fit these forks (sold separately)
COMPATIBILITY
WHEELS:
26" 27.5" 29" TYRES:
up to a 3" tyre OFFSET:
MINIMUM FORK OFFSET 44mm HUB:
STD & BOOST FORKS:
This direct mount mudguard is designed for the forks listed below which must be: DISC BRAKE ONLY WITH THREADED HOLES
* 2016 > 2021 FOX 32, 34, 36, 38, 40(a), 49
* 2022 FOX 34(b), 36(c), 38, 40 (a)2020 FOX 40 (26" or 27.5") or older needs Adapter Bracket (RR123) - sold separately
(b)2022 FOX 34 needs Stability Bracket if the rear of the brace is hollowed out (not available yet)
(c)2022 FOX 36 needs Stability Bracket (supplied)
* NEW MARZOCCHI FORKS(d) (Fox chassis version) (d)Z2 forks may not come with threaded holes
* 2021 ROCKSHOX 35
* 2021 ROCKSHOX Recon (Gold / Silver)
* 2021 ROCKSHOX Paragon (Gold / Silver)
* 2019 OHLINS RXF34, RXF36, DH38(e) (or older) (e)DH 38 requires Stability Bracket (RR126) - sold separately. NOTE: above adapter also fits RXF36 and adds stability
* 2019 SR SUNTOUR FORKS (f) (or older) (f)forks that have an unthreaded straight through hole in the centre of the fork brace needs our SLEEVE PACK (RR118) - sold separately.
* 2021 DVO D1 Diamond Boost (g)
* 2021 DVO D1 ONYX Boost SC (h) (g) needs our custom bolt / washer (RR127)
(h)needs our custom adapter bracket and custom M4 bolt / washer (RR125).
