Best selling Bike headsets from Reverse

This page always stays fresh and updates automatically.

1. Reverse Headset cap with screw

The headset cap with screw from Reverse is an essential component for bicycles that enables reliable and precise steering. Made from high-quality aluminum, this cap not only offers an appealing look but also provides high durability and stability. Weighing only 8 grams, it is lightweight and does not add to the overall weight of the bike. The M6/32mm screw ensures a secure attachment and easy installation. This headset cap is specifically designed for ahead sets and is ideal for cyclists who value quality and functionality.

- Made from lightweight and durable aluminum
- Secure attachment with M6/32mm screw
- Designed for ahead sets.
 

2. Reverse Barspin Top Cap

The Barspin TopCap allows you to rotate the handlebars a full 360 degrees without twisting the front brake cable. The front brake cable is routed through the headset to prevent twisting during handlebar rotation. The set includes a banjo screw, a headset hook, and a laser-engraved "Born to Ride" aluminum top cap. It is compatible with all standard and tapered fork steerer tubes of 1 1/8 inches. This product is perfect for dirt jump bikes, slopestyle, and freeride mountain bikes. 

Actual product image Reverse Barspin Top Cap
Bike headsets
Quantity discount
CHF11.70 per piece for 2 units

Reverse Barspin Top Cap

3. Reverse Base lower bearing shell - 1.5 inch - Black

The REVERSE Base lower headset is a high-quality steering assembly specifically designed for cyclists who value performance and reliability. Featuring a tapered design intended for 1.5-inch steerer tubes both at the top and bottom, this headset offers excellent compatibility with a wide range of bicycle models. Its robust construction ensures exceptional resistance to stress and vibrations, providing optimal stability under demanding conditions. Made from premium materials, this headset is built to deliver long-lasting durability, making it a reliable choice for all cyclists. The precise craftsmanship and smooth operation allow for responsive handling, significantly enhancing the riding experience whether you're riding cross-country, trail, or downhill.

- Tapered design for 1.5-inch steerer tubes at both top and bottom
- Made from premium materials for long-lasting durability
- Robust construction for optimal stability under load
- Precise craftsmanship for responsive handling.
 

Actual product image Reverse Base lower bearing shell - 1.5 inch - Black
Bike headsets
−10%
CHF33.30 was CHF36.90

Reverse Base lower bearing shell - 1.5 inch - Black

4. Reverse Lift adapter for easyLOOPsystem

The Reverse Lift Adapter for the easyLOOP system is an innovative solution for downhill bikes with dual crown forks. This adapter makes lifting easier and ensures stable and precise handling. In the case of special stems that do not have a notch between the fork clamp screws, the lift hook may not always sit optimally, making lifting difficult or even impossible. The lift adapter is mounted directly on the 1 1/8" fork steerer, instead of a spacer, and can be installed above or below the stem as needed. Weighing only 21 grams, the adapter is lightweight and does not add to the overall weight of the bike. It is made from high-quality aluminum to ensure durability and stability.

- Facilitates lifting for downhill bikes
- Ensures stable and precise lifting
- Direct mounting on the fork steerer
- Lightweight aluminum design at only 21 grams.
 

5. Reverse Angle spacer for tapered forks

With the 0.5° Angle Spacer, the geometry of the bike can be finely tuned. It is possible to make the steering angle half a degree flatter, which allows for even more performance on steep and challenging descents.

The spacer is placed between the crown of the fork and the headset of a tapered fork.

Material: Aluminum
Weight: 19 g.
 

6. Reverse easyLOOP Ahead adapter for easyLOOP system

The Topcap Adapter for expanding the easyLoop System allows for installation on even more bikes. The adapter is mounted in place of the existing top cap and provides the option to install the Reverse easyLoop Adapter above the stem. There are several reasons why installation above the stem is necessary:

- For stems that require special spacers that cannot be replaced by the easyLoop Adapter (e.g., C.I.S System).
- For bikes where the steerer tube has been cut too short and no spacers can be mounted under or above the stem.
- For bikes where the easyLoop Adapter can be installed under the stem, but there is not enough clearance between the easyLoop Adapter and the frame.

Not compatible with stems where the top cap is integrated into the stem or that require a special top cap.

Warning: No stem should be mounted on the Topcap Adapter. The adapter is not intended to extend the steerer tube and should only be used with the easyLoop Adapter!

Features:
- Material: Aluminum (body), Rubber (O-rings), Steel (screw)
- Screw: M6 (for standard headset claws)
- Weight: 45 g (+/- 5% weight tolerance).
 

Actual product image Reverse easyLOOP Ahead adapter for easyLOOP system
Bike headsets
Quantity discount
CHF13.80 per piece for 2 units

Reverse easyLOOP Ahead adapter for easyLOOP system

7. Reverse Steerer Clamp - 1 1/8"

This spacer eliminates the issue of a "loose" headset thanks to its additional clamping function, making it easier to work on when you want to remove your handlebars and stem. It also secures the headset during transport of your bike in a car, train, or airplane by providing extra stability with the additional screw when the handlebars are twisted.

- For 1 1/8'' fork steerer tubes (Ø 28.6 mm)
- Height: 10 mm
- Weight: 13.8 g
- Material: Aluminum.
 

Actual product image Reverse Steerer Clamp - 1 1/8"
Bike headsets
Quantity discount
CHF11.60 per piece for 2 units

Reverse Steerer Clamp - 1 1/8"

8. Reverse Ultra Light

Attention all weight tuners! The Reverse ultra light spacer is probably the lightest spacer ever, as it is even lighter than conventional carbon spacers. The sale is in a set (2 x 10 mm, 2 x 5 mm) in one color. This allows the spacers to be used variably and can be adjusted as needed to compensate for 5 mm to 30 mm.

Material: Aluminum
Size and weight: 5 mm (2.6 g), 10 mm (4.7 g).
 

Actual product image Reverse Ultra Light
Bike headsets
Quantity discount
CHF10.80 per piece for 2 units

Reverse Ultra Light

9. Reverse "A-Head Caps" silber

The "A-Head Caps" from Reverse are a high-quality headset specifically designed for use in bicycles. Weighing only 8 grams, these caps provide a lightweight yet robust solution for controlling your bike. Made from aluminum, the caps are characterized by their durability and resilience, making them an ideal choice for demanding cyclists. The silver color gives the product an appealing aesthetic that harmoniously fits into various bike designs. The caps come with an M6/32mm screw, allowing for easy installation and adjustment. The Ahead headset type ensures precise steering and improved handling, contributing to a pleasant riding experience. These "A-Head Caps" are a practical addition to any bike, offering both functionality and style. 

Actual product image Reverse "A-Head Caps" silber
Bike headsets
Quantity discount
CHF9.80 per piece for 2 units

Reverse "A-Head Caps" silber

10. Reverse Base cone ring for 1.5 inch to 1 1/8 inch

The reverse base fork cone ring reduces the contact surface from 1.5 inches to 1 1/8 inches.

- Colour: Black
- Fork cone ring: 1.5 inches
- Reduced to 1 1/8 inches
-
Weight: 10 g. 

Actual product image Reverse Base cone ring for 1.5 inch to 1 1/8 inch
Bike headsets
−10%
CHF8.40 was CHF9.30

Reverse Base cone ring for 1.5 inch to 1 1/8 inch

Product order
See all products