Reverse Stem "Black One Enduro" 35mm,0°, Ø35mm, black / yellow

This stem is Enduro! No discipline is as broad as Enduro sports. The bikes used are true all-rounders. They are suitable for everything from trail riding to excursions in the bike park. And this is exactly the purpose for which the Black One Enduro stem was developed and designed!

This stem has undergone the EFBE MTB Gravity TRI test, which is one of the toughest laboratory tests currently available. Even after hundreds of thousands of load cycles in the EFBE lab, this stem could not be pushed to its limits.

To further reduce stress on the handlebars, we developed the Stress Reduction Clamping (SRC) system. The greatest stress areas are located at the junction between the stem and the handlebars. Particularly at the lower gap of the handlebar clamp, significant loads occur.

The SRC technology prevents the inevitable notch effect that would otherwise occur, as there is no longer a gap present. Only at the top side of the stem clamp is a gap still needed for clamping effect! This results in almost optimal force transmission all around with reduced notch effect. A significant reduction in stress on the handlebars has been demonstrated in laboratory tests!

This technology is especially recommended for the use of carbon handlebars. With a length of 35 mm, it is optimal for modern frames with long top tubes/reach!

Features

• Length: 35.0 mm
• Handlebar clamp: Ø 35.0 mm
• Angle: 8°
• Height: 40 mm
• Clamp width: 50 mm
• Ø Steerer tube: 1 1/8"
• Weight: 130 g (+/- 5% weight tolerance)
• Design: CNC machined
• Material: Aluminum 6061 T6

Extras

• Micro adjustment lines: for better orientation when aligning the handlebars
• Stress Reduction Clamping (SRC): for optimized load distribution at the handlebar clamp

Color
Black/Yellow.