Questions about Magura MT7 Pro

Yes, they work for both. They come with long brake lines. Olives for shortening are included. You have to shorten the front and replace the olive.

Correct.

The Magura MT7 Pro brake set contains the following components: - Front brake and rear brake - Brake lever (1-finger HC lever) - Brake hoses (2200 mm length) - 4-piston brake callipers - Mounting material (screws and adapters) - Brake pads

"Brake set front + rear" for the Magura MT7 Pro means that the set is designed for both the front and rear brakes of the bike. It contains two separate brake systems, one for the front brake and one for the rear brake, including two brake levers and two brake callipers. It is therefore two complete brake systems, not a single set that can be used for both sides.

No, what is meant is that a set can be fitted either at the front or rear. If you need both, you have to order 2 sets. But then everything is included in one set. You only need a bleeder set for bleeding.

You are right. The weight should be 255 g. It would be 720 g with packaging. Many thanks for the tip.

In fact, it is a single Magura MT7 PRO front or rear disc brake, so it is not written as usual: for front or rear.

Thank you very much for pointing this out. We will be happy to forward this internally to the responsible department and hope that this will be checked and adjusted in a timely manner, as a guarantee is provided here.

Yes, everything is included. You may have to shorten the brake line.

According to our information, this is the 2021 version.

According to our information it's a single break.