PiL Kreos

LED street light series featuring a housing and cover made of painted die-cast aluminum with a polyester powder coating, following a prior chemical conversion. The fixing part for poles is made of die-cast aluminum with a grainy paint finish, suitable for poles with a diameter of 60 mm or 76 mm. High-performance reflectors are crafted from high-purity aluminum, bright and oxidized, with subsequent silver 99.99% PVD treatment, resulting in a surface with a reflection of over 97%, which is non-iridescent. Depending on the model, the following optics are available: SR/075 for narrow roads with a B/H ratio (road width/pole height) of up to 0.75, SR/100 for two-lane roads with a B/H ratio of 1, SR/125 for wide roads with a B/H ratio of 1.25, and SR/150 for wide roads with a B/H ratio of 1.5. Complies with the UNI 10819 standard and regional laws on light pollution. Gasket made of resistant silicone with increased resilience. Diffuser made of extra-clear tempered safety flat glass. Line disconnect plug that automatically interrupts the power supply when the ring is opened. Powerful electronic ballast included, along with an additional protective device against mains overvoltage up to 10 kV. Supplied with a 1-meter cable H07RN-F 2x1.5 mm2 or H07RN-F 4x1.5 mm2 for dimmable versions, allowing mains connection without opening the light fitting. External screws made of stainless steel. The NEMA versions feature a NEMA socket type connected to the DALI dimmable converter and a watertight short-circuit protection plug that allows the luminaire to operate in On-Off mode. These versions are intended for the installation of compatible smart solutions. The KREOS versions can be manufactured on request with all the optics available for the range. For information on other color temperatures and the color rendering index, please contact the factory. CLO (Constant Light Output) option available.