CHF32.70
Arctic Z2 Basic
Table, 25"
Question about Arctic Z2 Basic
How far does the table support go under the table? I only have a depth of approx. 23mm, after which a metal tube comes from the table substructure.
Well, 23 mm is definitely not enough! You need at least 50 mm, ideally 60 mm!
It depends on how thick the tabletop is. The "clamp" has a maximum width of 70 mm. This means, for example, that with a tabletop of 35 mm, the clamp still reaches 35 mm under the table. Then add another 4 cm of the screw for tightening.