Best selling 3D printers
Here's a ranking of the best products in this category. To give you a quick overview, we've also added some key information about the products.
1. Bambu Lab X1 Carbon Combo
Color, the ultimate expression of emotions, is presented to you by the Automatic Material System (AMS) from Bambu Lab. You can now print freely in multiple colors and materials, becoming a 3D printing maestro. Dual automatic bed leveling ensures double guaranteed prints. The Bambu Lab X1 uses two sets of independent sensors and an algorithm to measure the height of the nozzle relative to the bed. Lidar and analog force sensors provide an additional layer of redundancy in bed leveling. Tired of waiting for the first layer? The Bambu Lab X1 has your back. The Lidar sensor can check your first layer, allowing you to focus on other tasks. Spaghetti detection: Our AI keeps an eye out for spaghetti monsters, so you can sleep soundly knowing your printer is safe. The X1 is assembled, tuned, calibrated, and tested before being shipped to you, so you can start printing right away. You can send prints using Bambu Studio and control your printer anytime and anywhere with the Bambu app. Additionally, we support SD cards and local networks for printing your projects.
What you can expect from the X1-Carbon Combo 3D printer:
- 20 m/s² acceleration
- Printing in up to 16 colors
- Micro-Lidar-assisted bed leveling
- Active vibration compensation for better print quality
- Spaghetti error detection and auto-pause
- Continue printing after a power outage.
2. Filapen 3D pen with 10 filaments
The 3D pen offers easy handling and allows for the creation of three-dimensional artworks and models. The set includes various PCL filaments that are environmentally friendly and biodegradable. This not only fosters creativity but also raises awareness of sustainability. Additionally, the 3D pen is safe to use, as it operates at low temperatures, minimizing the risk of burns. This makes it suitable for children, who can be creative under the supervision of parents or teachers without the risk of injury. The set is packaged in a high-quality box, making it a great gift for craft enthusiasts and creative minds of all ages.
3. Creality K1C
Creality K1C The K1C builds on the success of the highly praised Creality K1 and is a closed-core XY FDM printer with speeds of up to 600 mm/s. The K1C is designed to compete with the best 3D printers in the industry, setting a new standard with its all-metal hotend, improved motor system, and innovative build plate. The capabilities of the K1C extend beyond PLA, as it is specifically optimized for the use of carbon fiber filament - the "C" in K1C stands for Carbon. Additionally, the K1C hotend can reach and maintain temperatures of up to 300 degrees Celsius, and its direct drive system is designed to handle carbon fiber filament with exceptional performance.
New All-Metal Extruder Kit The extruder is optimized to tightly grip the filament without slippage. The copper nozzle with a steel tip is equipped with a titanium alloy to prevent heat buildup and allow for quick changes.
Use of CF Filaments With a 300℃ hotend and a hardened steel nozzle tip, the K1C can use carbon fiber-filled filaments to print 3D models with excellent mechanical strength as well as high wear and deformation resistance.
No Vibration at High Speed The K1C can print at speeds of up to 600 mm/s while avoiding vibrations. The metal frame is extremely stable, as it contains die-cast parts with fewer seams and connections. The print head fans are dynamically balanced to rotate smoothly while cooling the hotend and during 3D printing. Additionally, the G-sensor in the print head eliminates resonance with the input shaping. Therefore, your prints will not be affected by ringing or ghosting.
Silent Mode & Air Purifier Whenever you desire peace and quiet, simply switch to Silent Mode, where the noise level is less than 4 dB.
4. Creality Ender 3 V3 SE
Stable, fast, secure: The Creality Ender-3 V3 SE is a 3D printer for objects measuring 22 x 25 x 22 cm (width x height x depth). It features a sturdy metal structure with an integrated power supply. Leveling is the foundation for print quality. The Ender-3 V3 SE is equipped with a CR-Touch sensor for automatic leveling and a strain sensor for automatic Z-offset adjustment. Just sit back and enjoy successful printing. Low-vibration components and a specially designed motherboard promote particularly quiet operation. The resume function allows for the continuation of interrupted print projects. The Ender-3 V3 SE delivers precise results for applications in medicine, architecture, model making, or industry. It has an improved user interface for a clear view of the print status. The printer supports 3D printing with PLA, TPU, and PETG filaments.
5. Bambu Lab P1S Combo
The Bambu Lab P1S Combo is a state-of-the-art 3D printer known for its speed and versatility. Equipped with an advanced cooling system, the P1S offers enhanced printing performance and supports a wide range of modern filaments. A standout feature is the integrated activated carbon filter, specifically designed for printing materials like ABS, to minimize unpleasant odors and harmful gases during the printing process. The Combo version of the P1S includes the Automatic Material System (AMS), which allows for printing in multiple colors and materials, significantly boosting creativity and flexibility in 3D printing. The printer is ready to use right away and requires no complicated calibrations, making it a user-friendly choice for both beginners and experienced users. With a direct drive extruder, the P1S ensures precise extrusion, resulting in smooth and detailed print results.
- Integrated Automatic Material System (AMS) for multi-color printing
- Activated carbon filter to reduce odors and harmful gases
- Ready to use with automatic calibration
- Direct drive extruder for precise extrusion
- Supports a variety of filaments, including PLA, ABS, and TPU.
6. Bambu Lab A1
The Bambu Lab A1 printer is cutting-edge technology that revolutionizes the field of 3D printing. Powered by the latest advancements in additive manufacturing, this printer sets new standards in precision, speed, and versatility. With its sleek design and user-friendly interface, the Bambu Lab A1 can be seamlessly integrated into any professional workspace or personal creative studio.
Active flow rate compensation: The A1 revolutionizes flow control in 3D printing. It uses a high-resolution, high-frequency eddy current sensor to measure the pressure in the nozzle. The algorithm actively compensates for the flow rate based on the measurements to ensure precise extrusion.
Fully automatic calibration: The A1 performs various calibrations entirely on its own. It automatically and carefully calibrates the Z-offset, bed level, vibration resonance, and nozzle pressure for each print job.
Quick-change hotend design: The hotend can be easily plugged in and out with just one clip.
Active motor noise suppression: The A1 can calibrate parameters to compensate for tiny individual differences between the drive motors. This balances out the unwanted harshness of the motor noise.
Bed slinger with CoreXY speed and quality: Full metal rails, a rigid frame, a nozzle pressure sensor, an accelerometer, a powerful MCU, and, most importantly, an advanced motion control system utilize these features to print a 14-minute Benchy with quality while adhering to all speed Benchy rules right out of the box, without the need for special filaments.
Synchronization with Bambu Studio and Bambu Handy: Remotely control and monitor your printer via Bambu Studio or Bambu Handy. With the built-in camera, you can also capture time-lapse videos.
7. 3Doodler Start PLUS 3D PRINTING PEN SPLUS 3D pen 0.77 mm Turquoise, Yellow
What distinguishes the 3Doodler Start +: The plastic from the 3Doodler Start + is warm but not hot. Once the cartridge is removed, children can safely shape it with their hands. The 3Doodler Start + and the included ECO cartridges have been specifically designed to be completely safe for children. The eco cartridges for the 3Doodler Start + are made from safe, non-toxic, BPA-free, and fully biodegradable materials. When fully charged, the 3Doodler Start + operates wirelessly for 45-60 minutes. Of course, you can continue to use it as long as it is connected to the power supply.
Contents of the kit:
- 3Doodler Start + pen
- 2 packs (48 pieces) of ECO cartridges
- USB cable
- Instruction manual in Polish with a project book
Technical specifications:
- Printing material: ECO cartridges
- Heating temperature: 65 °C
- Length of a single ECO contribution after melting: 150 cm
- Printing speed: 10 mm/s
- Working time on full charge (wireless): 45-60 min.
- Maximum.
8. Bambu Lab A1 mini
The Bambu Lab A1 Mini 3D printer revolutionizes FDM 3D printing with its advanced flow control and high-precision printing technology. Equipped with a high-resolution high-frequency eddy current sensor, it accurately measures the nozzle pressure and dynamically adjusts the flow rate. This ensures exceptional printing accuracy. The A1 Mini comes pre-assembled and pre-configured, allowing setup for the first print to take only about 20 minutes. Additionally, the printer automatically performs various calibrations, such as Z-offset, bed height, vibration resonance, and nozzle pressure, making it user-friendly.
Highlights:
- Fully automatic calibration for Z-offset, bed height, vibration resonance, and nozzle pressure
- Automatic vibration calibration on both the X and Y axes
- Automatic tension check of the belts through vibration frequency calibration.
9. Creality Imprimante 3D Ender 3 V3 KE
Ender-3 V3 KE Creality Ender-3 V3 KE is an upgraded version of the Ender-3 V3 SE, featuring enhancements such as higher printing speed, greater filament compatibility, and a 4.3-inch color touchscreen. The machine is equipped with a CR-Touch auto leveling sensor and a strain gauge, making leveling and Z-offset calibration a breeze.
Exceptional printing speed: The printer can operate at a speed of 500 mm/s, allowing a Benchy to be printed in about 15 minutes.
A-axis linear rail, ultra-smooth motion: The precise linear rail on the X-axis is equipped with a ball-bearing slider that ensures every movement is precise, smooth, and frictionless. It is made of rigid steel and remains as good as new even after prolonged use.
Superior hotend for greater challenges: 60W ceramic heating capable of fully melting filaments for high-speed printing; bi-metal (copper and titanium alloys) as a thermal break, effectively preventing thermal creeping; copper nozzle enabling printing at 300 °C.
Dual fans for rapid model cooling: Each side of the print head is equipped with a model fan. Together, they quickly and evenly cool the freshly printed section, ensuring your prints are always in good shape.
Smart user interface at your fingertips: Responsive touch user interface with an intuitive tab bar; intelligent self-test for Z-offset, automatic leveling, and more with just a tap; real-time model preview and visual motion graphics of the printing parameters.
The fun goes beyond the confines of space with LAN printing and cloud printing. Every aspect of your 3D printer can be controlled from a PC or phone via WiFi.
10. Creality K2 Plus Combo
Creality K2 Plus Combo
Creality K2 Plus: Built for Ambitious Projects
The Creality K2 Plus is a state-of-the-art FDM 3D printer designed to meet the needs of professional and enthusiastic users. With its generous build volume of 350 x 350 x 350 mm, the K2 Plus allows for the production of large-scale models or multiple smaller objects in a single pass, giving you the freedom to tackle complex, large-scale projects.
Impressive Print Speed and Precision
Equipped with advanced stepper motors that deliver 32,768 microsteps per revolution, the K2 Plus achieves speeds of up to 600 mm/s with an acceleration of 30,000 mm/s², all while maintaining exceptional precision and stability. Thanks to its robust aerospace-grade aluminum frame, the printer ensures stable, vibration-free operation even at high speeds, making it ideal for demanding tasks.
Enhanced Apus Extruder for Versatile Material Handling
The K2 Plus features the Apus all-metal direct drive extruder, designed for versatility and high performance. This extruder includes a tri-metal nozzle capable of reaching temperatures up to 350 °C, allowing it to print with a wide range of high-performance materials such as PLA, PETG, ABS, ASA, and PA-CF. The extruder also comes with a built-in filament cutter and a filament run-out sensor, enhancing the efficiency and reliability of the workflow.
Extended Material Compatibility
For users working with demanding materials, the K2 Plus offers a heated build chamber that can reach up to 60 °C, making it ideal for printing with technical and wear-resistant materials. This high-temperature capability ensures strong adhesion and minimal warping, even when using high-performance filaments.
Product order
See all products