Best Alphacool products in the Water cooling pumps category
On this page you'll find a ranking of the best Alphacool products in this category. To give you a quick overview, we've already ranked the most important information about the products for you.
1. Alphacool DC-LT 2
The Alphacool DC-LT 2 2600rpm Ceramic is a pump which is intended for use in computer water cooling systems. The previous model was already considered a quiet little miracle. Now Alphacool has significantly improved this product thanks to the accumulated experience. Smaller to medium sized water circuits can be run virtually silent with this pump. Alphacool already uses this pump successfully in the GPU-AiO Eiswolf 2 which was classified as inaudible in various independent tests.
There are several points to mention: The true 3-phase sinusoidal drive of the pump contributes to the extreme smoothness of this pump. The impeller is suspended on a ceramic axle with two magnets. The ceramic axle is manufactured with high precision and the impeller is cleanly balanced. All these details contribute to the Alphacool DC-LT 2 2600rpm Ceramic - 12V DC (Sinus PCB) pump works virtually noiseless.
The control of the pump, the mechanics and thus the pump itself is highly efficient. The power consumption compared to other models is significantly lower with the same and higher power output. It has a wide control range and starts reliably from 7V power supply.
2. Alphacool VPP655 T12 (1/2' hose connection)
Alphacool's new power pump series, unique performance at an unbeatable price. The 12V pumps can be easily connected to the power supply and the pump starts together with the computer! In this way, maximum comfort and the greatest possible safety are achieved.
3. Alphacool Ice bucket D5 250mm Acetal incl. 1x Alphacool VPP655
The D5 sundae This sundae is the bigger brother of the DDC version. The pump is fixed with a mounting ring that holds the pump in place with eight screws. The illumination of the acrylic version is possible here with four LEDs that are plugged into the pump base. Illumination from above is made possible by the illumination module. The riser tubes and bubble down do an impeccable job here too. They can be attached either by means of the brackets or by means of the stands included in the scope of delivery. If there is space in the 3.5" hard drive bays in the enclosure, threads are also provided for this in the pump base (pump decoupling with M4 female and male thread necessary - Art. 52007). The scope of delivery includes 8x M4x12mm screw 8x M4x8mm screw 4x M4 nut 1x mounting ring 1x O-ring ID approx. 54mm 2x stand feet 1x hexagonal key 1x hexagonal nut 1x O-ring ID approx. 54mm 1x hexagonal key 1x hex. 1x hexagonal key 2,5mm Dimensions 250mm Version Dimensions incl. bracket without stand (LxWxD): 277,5 x 136 x 80mm Dimensions without bracket incl. stand (LxWxD): 324 x 87,5 x 80mm Acrylic tube diameter: 60mm Filling capacity: 360ml .Pump: Alphacool VPP655 - Single Edition Technical details Dimensions (WxHxD): 65x65x57mm (without connectors) Motor: Electronically commutated spherical motor Standard voltage: 12V DC Power consumption: 23W Permitted voltage: 8-24V DC Pressure at 12V: 3.7m Water?Maximum flow rate: 350l/h Pumping medium: Water, water/glycol mixture Maximum system temperature: 60??C Related materials: Stainless steel 1.4571, PPS-GF40, EPDM O-rings, aluminium oxide, hard carbon Special features: Adjustable in five stages.nf stages Stage 1: 1800 rpm Stage 2: 2550 rpm Stage 3: 3300 rpm Stage 4: 4050 rpm Stage 5: 4800 rpm Power connection: 4 Pin Molex Scope of delivery 1x Alphacool Ice Bucket D5 250mm Acetal incl. 1x Alphacool VPP655 Assembly instructions Download 3D-File (.stp) Note Not suitable for continuous operation with liquids containing titanium dioxide or glycerine. Typically, many pastel colours use these additives.
4. Alphacool Ice pump VPP755 incl. ice cover D5
The ice pump VPP755 has dimensions (DxH): 60 x 53,5mm;Cable length: 50cm;Standard voltage: 12V DC;Power consumption: 14W;Allowed voltage: 8-13V DC;Pressure at 12V: 4m water column;Maximum flow rate: 350l/h;Pump medium: water, water/glycol mixture;Maximum system temperature: 65°C;Power connection: 4 Pin Molex;Speedometer signal: 3Pin;PWM signal: 4Pin.
5. Alphacool single for DC-LT pumps
The optimal addition to the Alphacool DC-LT Plexi attachment including Alphacool DC-LT ceramic 12 volt pump. The Alphacool expansion tank individually for DC-LT pumps is another module for expanding and improving the Alphacool DC-LT ceramic 12 volt pump. The basis here is the already converted pumps with an Alphacool DC-LT Plexi attachment. These can now be fitted with an expansion tank in just a few simple steps. Simply place the container on the attachment with the included seal, tighten the 4 screws provided on the corners, and you're done! A further 1/4" thread opening was inserted at the side. This can be used as an inlet opening or for a lighting module.
6. Alphacool DC-LT 3600 Ceramic 12V DC Pump bulk Version
Water cooling in general is not only for Bigtower and in the high-end area at home. Even barebones, HTPC or desktop computers want to be supplied with the cooling wet. Here it is less about extreme overclocking characteristics, more about the absolute silence in the system.
In addition to the fans, which are whisper-quiet or no longer audible due to water cooling, the pump is another noise-producing element. Not this pump! Quieter from the ground up than most fans on the market, yet powerful enough to cool the CPU and GPU with ease. A ceramic axle also promises extremely quiet running over a very long time. And the size? The outer dimensions correspond approximately to a 2Euro coin (about 0.5 cm larger in radius).
7. Alphacool 17482 Computer cooling system part/accessories
After completing the water circuit, the last step is usually filling the system. Now and then it happens that some liquid escapes somewhere. Often it is because a HardTube or hose is not seated correctly or a connection was not completely screwed in. With the Alphacool Leak Testing Tool you can already test the tightness of your water circuit before filling the system.\n\nConstruction\nThe Leak Testing Tool consists of a hand pump, a pressure indicator, a 11/8mm hose at the end of which a connection with G1/4" thread is attached. The whole is connected together by a TEE piece. The hose is 40 cm long and has a kink protection spring.\n\nApplication\nYou connect the Alphacool Leak Testing Tool to a free G1/4" port in the system and operate the hand pump until the desired pressure is reached. Please note here that there may be different maximum specifications depending on the manufacturer. Now you should wait about 15 to 20 minutes. If the pressure has not dropped after this time, the water circuit is tight.
8. Alphacool Laing DDC310 - Complete Edition Ice Sheet - silver/Plexi
The widespread Laing DDC pumps are growing. Freshly packed, this pump can also begin its life with a lot of self-confidence. Some details have been changed. On the one hand some performance was saved to solve a widespread problem: The volume. Hardly any other pump can match this when it comes to noise emission. For the most common water cooling system consisting of cooling for CPU and GPU this pump should be the first choice.
This pump does not come in the familiar plastic housing as before. New is the perfectly tuned brass housing which adorns the exterior. This new housing promises a longer service life for the pump. Air flows through the cooling fins, which is then passed directly to the pump board via an internal heat conducting pad. A further feature is the decoupling option provided. By means of the special M4 screws, the supplied decoupling can be screwed into the head of the screw, which in turn is connected to the housing. The novelty of this set is that the V.2 of the Alphacool ice covers are used, which offer the possibility of three G1/4" connections for the inlet and two G1/4" connections for the outlet.
Inlet possibilities: Front, Side, Top
Outlet possibilities: Front, Top
In addition, three G1/4" screw plugs are included to close the unused In/Out connections. Another feature is the pre-assembled holder as we know it from the new ice cream cups. Thus this pump set can also be mounted directly on the bottom of the housing. Now as a combination with the proven Alphacool ice cover LainG DDC Plexi or Acetal attachment.
9. Alphacool Alpha Core 200 Aurora Reservoir w. VPP 1019164
Expansion tank for water cooling systems, for D5 and VPP pumps, VPP Apex pump included, discreet design, integrated RGB lighting.
10. Alphacool DDC310 Single Edition silver
The widely used Laing DDC pumps are growing. Freshly packaged, this pump can also start its life with a lot of self-confidence. Some details have been changed. On the one hand, a lot of power has been saved in order to remedy a widespread problem: The volume! Hardly any other pump can hold a candle to this in terms of noise development. For the most common water cooling system consisting of cooling for CPU and GPU this pump should be the first choice.
