Best Alphacool products in the Thermal pads category
On this page you'll find a ranking of the best Alphacool products in this category. To give you a quick overview, we've already ranked the most important information about the products for you.
1. Alphacool Thermal Paste Thermal Pads /m-K
Alphacool's ultimate solution to cool (d)a computer with a layer of ice. An ice layer not in the traditional sense of frozen water but a layer that makes every chip freeze. Because the properties of the new thermal pads speak a clear language.\n\nThe "Alphacool ice layer" offers all the advantages and typical properties of a thermal pad: self-adhesive, elastic, adaptable and much more! Just as versatile is also the field of application, whether for RAM and motherboard coolers or graphics card and CPU coolers, everywhere where board meets heatsink, one is well advised with the Alphacool ice layer. \n\nThe ice sheets Light are available in the performance level with 7W/mk in 0.5mm, 1mm and 1.5mm thickness respectively. Perfect to be able to compensate differences in height. Likewise, each thickness is again in 100x100mm and 120x20mm (suitable for RAM cooler). These can be easily separated with scissors to customize the right size for each component.
2. Alphacool Ice Layer - Sarcon XR-e 2 Pack
Alphacool's solution to cool (d)a computer with a layer of ice. A layer of ice not in the traditional sense of frozen water, but a layer that makes every chip freeze. The "Alphacool Ice Layer" offers all the advantages and typical properties of a heat conduction pad: self-adhesive, elastic, adaptable and much more. The area of application is just as versatile, whether for RAM and mainboard coolers or graphics card and CPU coolers, wherever the PCB meets the heat sink, you are well advised to use the Alphacool Ice Layer. Dimensions: 120x20x1.5mm
3. Alphacool Thermal conductive adhesive pad double-sided
With the double-sided heat conduction adhesive pad from Alphacool, you can mount your cooler in the desired position, regardless of hole spacing, mounting brackets or other intended options. This is particularly interesting, for example, with the in-house MCX system for mounting mini-coolers for graphics cards or mainboards. But long-term tests show that you can do much more than just mount mini-coolers. Dimensions: 100x100x0.5mm
4. Alphacool Thermal conductive adhesive pad double-sided 15x15x0,5mm
Technical data:
Material: Polymers
Colour: white
Dimensions (L x W x H):15x15x0,5mm
Thermal conductivity: up to 1W/mk
Adhesive strength: min: 16N/25mm electrical non-conductive
ROHS compliant scope of delivery:
1x Alphacool heat conductive adhesive pad double-sided 15x15x0,5mm
5. Alphacool 12196 Computer cooling system part/accessories
The inevitable differences in height and unevenness on the heat sinks and the elements to be cooled, as well as the smallest grooves, can be compensated for thanks to the very elastic contact pressure and the low hardness of the pads.\nPrior to use, the protective film attached to the surface of the pads must be removed!\nThe pads can, of course, be cut to the desired size. For this purpose, scissors or a sharp knife is enough.
6. Alphacool 12459 Thermal pad
Alphacool's ultimate solution to cool (d)a computer with a layer of ice. A layer of ice not in the conventional sense of frozen water but a layer that brings every chip to freeze. The properties of the new thermal pads speak for themselves.\n\nWith up to 17 W/mk, the pads surpass all previous thermal pads and pastes! Now all hardware components can be easily and cleanly installed with thermal pads! The "Alphacool Ice Layer" offers all advantages and typical properties of a thermal pad: self-adhesive, elastic, adaptable and much more! The application area is just as versatile, whether for RAM and motherboard coolers or graphics card and CPU coolers, everywhere where PCB meets heatsink, you are well advised with the Alphacool Ice Layer. The pads are available in different power levels, 11, 14 and 17W/mk, each available in 0.5mm, 1mm and 1.5mm thickness to perfectly compensate for height differences. Each thickness is also available in 100x100mm and 120x20mm (suitable for RAM coolers). These can be easily separated with scissors to adjust the right size for each component individually.
7. Alphacool Thermal pad for NexXxoS
The inevitable differences in height and unevenness on the heat sinks and the elements to be cooled, as well as the smallest grooves, can be compensated for thanks to the very elastic contact pressure capability and the low hardness of the pads. Before use, the protective film attached to the surface of the pads must be removed. Of course, the pads can be cut to the desired size. A pair of scissors or a sharp knife is sufficient for this purpose.
8. Alphacool Ice Layer Ultra Soft Thermal Pad
The Alphacool Ice Layer Ultra Soft are the non-plus-ultra in the field of thermal pads. Due to their outstanding properties, you can almost compare them to a thermal paste. Because the Ice Layer Ultra Soft pads nestle much better to components, which contributes to an excellent cooling performance. The Ultra Soft material of the Ice Layer Ultra Soft thermal pads acts similar to a thermal paste. While normal thermal pads are merely compressed by the contact pressure, which can lead to uneven contact pressure on different high components, this is almost impossible with the Ice Layer Ultra Soft thermal pads. This is because the material distributes itself similarly well as a thermal paste and thus prevents the highest components from being subject to increased contact pressure from the cooler. In the worst case, this can cause the PCB to bend. Due to the soft consistency, all unevenness is also filled much better. The Ice Layer Ultra Soft heat conduction pads thus nestle up to the components much better, which of course benefits heat transfer. The special material also cannot dry out. Usually, the silicone of heat conduction pads bleeds out over time. As a result, they become hard and the performance of the pads drops rapidly after a certain point. This is not the case with the Eisschicht Ultra Soft thermal pads. They can be used for a significantly longer period of time without losing significant performance. The consistency of the heat conducting material is similar to a viscous heat conducting paste. To ensure that the material remains stable and can be used as a heat conduction pad, a special fabric is embedded. This ensures perfect distribution of the material if the element to be cooled has an uneven shape. Examples include voltage converters, VRam and similar electronic components of all kinds that require cooling. To cut the thermal pads to size, it is essential to leave the foil on the pads. This allows the pads to be easily cut to size with scissors. This is just as easy as cutting paper. The cut edges remain perfectly clean and do not fray. The Alphacool Eisschicht Ultra Soft thermal pads are superior to the usual thermal pads in many respects and are also used in all Eisblock Aurora graphics card coolers from Alphacool.
9. Alphacool Ice Layer - Sarcon XR-j 2 Pack
Alphacool's solution to cool (d)a computer with a layer of ice. A layer of ice not in the traditional sense of frozen water, but a layer that makes every chip freeze. The "Alphacool Ice Layer" offers all the advantages and typical properties of a heat conduction pad: self-adhesive, elastic, adaptable and much more. The area of application is just as versatile, whether for RAM and mainboard coolers or graphics card and CPU coolers, wherever the PCB meets the heat sink, you are well advised to use the Alphacool Ice Layer. Dimensions: 120x20x1.5mm
10. Alphacool Ice layer - 100x100x1,5mm (Sarcon XR-j)
Alphacool's ultimate solution (d)to cool a computer with a layer of ice. A layer of ice not in the conventional sense of frozen water but a layer that makes every chip freeze. Because the properties of the new thermal pads speak for themselves.
With up to 17 W/mk, the pads surpass all previously available thermal pads and pastes! So now all hardware components can be installed easily and cleanly with thermal pads!
The "Alphacool ice layer" offers all the advantages and typical properties of a thermal pad: self-adhesive, elastic, adaptable and much more! Just as versatile is the field of application, whether for RAM and mainboard coolers or graphics card and CPU coolers, wherever boards meet heat sinks, the Alphacool ice layer is the right choice.
