Thermal grease
Quantity discount
CHF7.65 per piece for 3 units CHF7650.–/1kg
Thermal Grizzly Kryonaut
12.50 W/m K, 1 g
Best Thermal Grizzly products in the Thermal grease category
On this page you'll find a ranking of the best Thermal Grizzly products in this category. To give you a quick overview, we've already ranked the most important information about the products for you.
1. Thermal Grizzly Kryonaut
The Kryonaut thermal paste is ideally suited for low-temperature cooling applications such as nitrogen or compressor cooling. However, it also works excellently between a CPU and an air or water cooler. Embedded in a carrier structure are aluminum and tin oxide components that optimally compensate for unevenness on the surfaces of the heat source and the heat sink while providing outstanding thermal conductivity. Unlike many competing products, Kryonaut does not begin to dry out even at 80 °C.
2. Thermal Grizzly Remove cleaning fluid
TG Remove is a specialized cleaner specifically designed for removing thermal paste. The acetone-based nano cleaner not only provides deep cleaning of surfaces but also has a degreasing effect. This allows for the safe and reliable removal of both conventional thermal pastes and liquid metal thermal pastes. Due to its degreasing properties, the TG Remove cleaner is particularly suitable for optimally preparing the surface for use with Thermal Grizzly Conductonaut.
Thermal grease
Quantity discount
CHF11.20 per piece for 2 units CHF933.33/1kg
Thermal Grizzly Remove cleaning fluid
12 g
3. Thermal Grizzly Conductonaut liquid metal
Overclockers, watch out. With the paste, the temperature of the processor can be lowered again by a few degrees without having to buy a new cooler. The application of the liquid metal is also surprisingly simple, especially as the manufacturer already includes the necessary accessories in the scope of delivery. If the use is still new at the first time, it goes at the latest from the second application quickly by the hand. Very good.
In addition, the Thermal Grizzly Conductonaut is extremely productive. The filling quantity of one gram of liquid metal is sufficient for far more than 10 applications. And if there is too much liquid metal on the processor, it can simply be sucked back into the syringe. The correct dosage is therefore very easy to handle. On average, half a grain of rice is sufficient for one processor.
Important: The Conductonaut must not be used with contact surfaces made of aluminium. Recommended materials are copper, nickel, silver and other metals. In addition, the Thermal Grizzly Conductonaut Heat Conducting Paste should be stored in its original packaging in dry rooms at room temperature.
Thermal grease
Quantity discount
CHF12.30 per piece for 2 units CHF12 300.–/1kg
Thermal Grizzly Conductonaut liquid metal
73 W/m K, 1 g
4. Thermal Grizzly TG-AS-3
Thermal Grizzly from Hamburg is a new German brand dedicated to the fight against high temperatures and poor heat transfer. The goal is to supply the overclocking community with high-performance thermal interface products, which have long been a weak point. However, the product portfolio can also be used for better and quieter cooling of gaming PCs, workstations, mini-PCs, and many other applications. In addition to higher clock speeds, better thermal interface products enable quieter cooling and a longer lifespan for the components being cooled.
To achieve these goals, Thermal Grizzly has closely collaborated with renowned extreme overclocker Roman "der8auer" Hartung during product development and testing, developing chemical compositions and analyzing competitors. The first product lines are now complete, meeting the highest standards of both the manufacturer and the overclocking community.
For optimal thermal conductivity of thermal pastes, proper application is just as important as a high-performance paste. In most cases, the thermal paste is delivered in small syringes, allowing only a drop of paste to be applied at a time. With the practical spatula from Thermal Grizzly, this drop can be spread particularly easily and thoroughly over the entire CPU head or other heatsinks, achieving optimal conductivity and ensuring your hardware is well-cooled.
Technical details:
- Color: Black
- Material: Plastic
- Quantity: 3.
Thermal grease
Quantity discount
CHF8.15 per piece for 3 units CHF4075.–/1kg
Thermal Grizzly TG-AS-3
2 g
5. Thermal Grizzly Shield protective lacquer
TG Shield has been specifically developed to protect sensitive components, such as those around the CPU or GPU die. The coating reliably insulates against liquids and electricity, so there’s no need to worry about damage or short circuits when applying liquid metal or other electrically conductive thermal compounds.
The protective coating has been optimized for quick drying, requiring only 30 minutes to fully cure at a room temperature of 20 degrees Celsius. The integrated brush allows for precise and easy application.
The 5 ml content is sufficient for approximately 10 to 20 applications, depending on the size of the CPU or GPU. The high application temperature range of -20 °C to 110 °C enables use on all common CPUs and GPUs, even under heavy load and overclocking.
Technical details:
- Content: 5 ml (for 10 to 20 applications)
- Application temperature: -20 °C to 110 °C
- Color: Red
- Curing time: 30 min at 20 °C
- Typical applications: CPUs, GPUs, notebooks, ICs.
6. Thermal Grizzly Hydronaut
Thermal Grizzly from Hamburg is a new brand dedicated to the fight against high temperatures and poor heat transfer. The goal is to supply the overclocking community with high-performance thermal products, which still represent a weak point. However, the product portfolio can also be used for better and quieter cooling of gaming PCs, workstations, mini-PCs, and many other applications. In addition to higher clock rates, better thermal products enable quieter cooling and a longer lifespan for the components being cooled.
7. Thermal Grizzly Conductonaut Extreme
Optimized formula for maximum cooling performance! Conductonaut Extreme is the advanced version of Thermal Grizzly's Conductonaut liquid metal thermal paste, aimed primarily at PC enthusiasts who want to get the most out of their hardware. As a gallium-based liquid metal, Conductonaut already exhibits ultra-high thermal conductivity. This already outstanding thermal conductivity has been enhanced after extensive testing and through a new material composition. Conductonaut Extreme consists solely of the metals gallium and indium. By omitting other alloy components, an increase in thermal conductivity of about 18% compared to the standard product is achievable. At the same time, this has improved material compatibility, preventing issues such as tin interactions. Due to the slightly corrosive effect of gallium on other metals, its use is only recommended on nickel-plated copper coolers. Conductonaut Extreme should not be used in conjunction with aluminum heatsinks. Unlike conventional pastes, Conductonaut Extreme contains no solid particles, allowing it to fill even the smallest imperfections at the nanometer level and enabling the minimal layer thickness for optimal performance.
Features:
- Syringe with 1 g of liquid metal thermal paste
- Optimized thermal conductivity compared to conventional liquid metal
- Increased material compatibility
- Optimal application through a metal needle.
8. Thermal Grizzly Kryonaut Extreme
Thermal Grizzly Kryonaut Extreme is a high performance thermal compound based on Thermal Grizzly proven Kryonaut paste. Maximum thermal conductivity through smallest particle size and layer thickness, combined with improved low temperature resistance are the basis for great temperatures during Extreme overclocking. Thermal Grizzly Kryonaut Extreme is an extremely powerful thermal paste with improved application and additional electrically non-conductive nano-aluminum-oxide particles. The smallest possible particle size allows for better filling of microscopic uneven areas and thus enables better thermal conductivity.
9. Thermal Grizzly Aeronaut
The Aeronaut thermal paste is an ideal entry-level product with very good effectiveness. The high surface protection and good thermal conductivity of Aeronaut are perfect for all users who want to effectively optimize their cooling system or replace the thermal paste that came with their hardware. Although the proportion of metallic elements is somewhat lower compared to other products in the Thermal Grizzly range, Aeronaut still offers reliable and high-performance thermal conductivity. In laboratory tests, Aeronaut demonstrates very long durability at high temperatures and is gentle on surfaces. When removing the thermal paste, it leaves hardly any micro-scratches on the cooling surfaces.
Thermal grease
Quantity discount
CHF8.55 per piece for 3 units CHF8550.–/1kg
Thermal Grizzly Aeronaut
8.50 W/m K, 1 g
10. Thermal Grizzly Conductonaut
With Conductonaut, Thermal Grizzly presents a high-performance paste based on liquid metal, consisting of a eutectic alloy designed for use at room temperature. A special mixing ratio of the metals tin, gallium, and indium achieves an extremely high thermal conductivity, accompanied by excellent long-term stability. The liquid components allow for the compensation and filling of tiny pores and gaps, which is only partially possible with conventional thermal paste due to the solid particles. The metallic surface of the cooler and heatsink is wetted.
