
Ansmann Comfort Plus quick charger for NiMH rechargeable batteries, AA or AAA
1 pcs., AA, AAA, 2100 mAh, Battery + charger
On this page you'll find a ranking of the best Ansmann products in this category. To give you a quick overview, we've already ranked the most important information about the products for you.
Perfect charging is so easy - Perfect 7 charging technology. Thanks to the intelligent Perfect 7 charging technology, the Comfort Plus ensures full batteries precisely and quickly. The fully automatic 7-stage charging maximises the service life and performance of your batteries considerably. The innovative charging process is based on findings from battery research and takes a large number of individual parameters into account. This makes it one of the most highly developed and innovative chargers on the market.
Perfect 7 Charging - The next level of NiMH charging technology: rapid capacity test. Immediately after insertion, the rapid capacity test determines the remaining charge of your battery and displays it on the LED panel for 5 seconds. The automatic detection of low-capacity batteries avoids negative surprises.
Gentle pre-charging: A weak or deeply discharged battery is pre-charged with a lower current if required.
Battery analysis: The battery behaviour of the cell is analysed and evaluated to determine whether it is still reliably usable or defective.
Fast charging mode: The Comfort Plus from ANSMANN charges your compatible NiMH batteries quickly and in a controlled manner with up to 650 mA. This not only saves you idle time, but also enables you to manage with fewer batteries overall.
IQ switch-off: Several protective mechanisms protect the inserted batteries from overheating and overcharging. So you can sit back and relax while your battery is recharged to full capacity.
Top-off charging: This stage ensures that the battery is gently charged to 100% full.
Trickle charging: The battery is kept in a fully charged state by means of charging pulses.
Intuitive and compact: The compact design of the charger makes it easy to take with you when travelling. It is intuitive to use and works on the simple principle of insert and go.
Ansmann Comfort Plus quick charger for NiMH rechargeable batteries, AA or AAA
1 pcs., AA, AAA, 2100 mAh, Battery + charger
Especially in the lithium segment, a variety of battery sizes are offered. With the Lithium 2 charger from ANSMANN, you choose a universal all-rounder with the best price-performance ratio. With its two charging slots, you can charge 1-2 Li-Ion batteries of sizes 26650, 22650, 18650, 18500, 17670, 16340, 14500, and others, or 1-2 NiMH Mignon AA / Micro AAA batteries independently of each other. The device automatically detects the inserted battery without any tedious adjustments. The charging process begins immediately after you have inserted the cell in the correct polarity.
To ensure that your battery can still deliver optimal performance even after many charging cycles, it is important that it is always charged gently and safely. The Lithium 2 charger from ANSMANN features high-quality, microcontroller-controlled charging technology that protects the battery in various ways from rapid wear. This includes automatic shutdown of the charging process as soon as the cell is fully charged, as well as gentle maintenance charging for NiMH cells after the actual charging process. Lithium cells, in particular, require careful handling due to their high energy density. The special electronics in the Lithium 2 charger from ANSMANN guarantee safety at the highest level.
For easy and quick reading of your batteries' charge status, a colored LED display is integrated above each slot. This also indicates incorrectly inserted batteries. The Lithium 2 charger from ANSMANN can be operated with any standard 5V 1A USB adapter. For optimal charging, ANSMANN recommends the 2.4A USB High Speed charger with Smart IC, which can nearly halve the charging time of the cells.
USB power supply not included.
Ansmann lithium 2
1 pcs., 10, 14430, 14650, 16650, 17650, 18700, 21700, 22500, 26650, Chargers without battery
The device automatically recognizes the batteries you insert without the hassle of adjusting buttons or switches. The charging process begins immediately after you have correctly inserted the cell. With individual slot monitoring, you can easily charge one or two batteries independently. The device automatically detects defective cells and alerts you to remove them. This user-friendly operation saves you a lot of time.
To ensure that batteries can deliver optimal performance even after many charging cycles, it is important that they are always charged gently and safely. The Powerline 2 from Ansmann features high-quality, microcontroller-controlled charging technology that protects the battery in multiple ways from rapid wear. This includes automatic shutdown of the charging process as soon as the cells are fully charged, as well as gentle maintenance charging for all cells after the actual charging process. Specifically, high-capacity cells require careful handling due to their high energy density. The special electronics in the Powerline 2 from Ansmann guarantee safety at the highest level.
Thanks to the intelligent "Perfect 7" charging technology, the Comfort Multi charges batteries precisely and quickly to full capacity. The fully automatic 7-stage charging significantly maximizes the lifespan and performance of your batteries. This innovative charging method is based on new findings from battery research and takes into account a variety of individual parameters. As a result, it is one of the most advanced and innovative chargers on the market.
In combination with a suitable power bank, the charger can also be operated completely mobile, making it very flexible to use. The charger can be connected not only via a power bank but also through any other USB port. It operates on the simple principle of inserting and starting. The clear status display allows for intuitive operation. With the easy-to-read three-color LED indicator, checking the status of each cell is a breeze.
The intelligent fast charger can charge up to four batteries of sizes AA, AAA, C, D, as well as one 9V E-block. The cylindrical batteries can be mixed and placed in any charging slot. Each cell is monitored individually during the charging process and charged to its maximum capacity.
Ansmann Comfort Multi Charger
1 pcs., 6HR61, 800.80 mAh, Chargers without battery
With this compact power device, you can charge up to 8 AA and/or AAA batteries. Additionally, the extra USB charging port allows you to charge your phone, smartphone, MP3 player, etc. You can first discharge batteries that are damaged or have weakened after long storage, and then recharge them. This way, you can refresh these batteries and increase their capacity.
The battery defect detection feature in the Powerline 8 ensures that defective and incorrectly inserted batteries, as well as disposable batteries, are recognized and not charged. The charging status of each battery is indicated by multicolored LEDs. Thanks to modern, microprocessor-controlled charging technology with multiple overcharge protection, the device automatically switches to pulse maintenance charging after the battery charging is complete – ensuring optimal performance and a long battery lifespan.
The ingenious design of the Powerline Vario X makes it possible to charge almost all Li-Ion battery packs and Li-Po battery packs. Whether it's a battery pack for a digital camera or camcorder, the sliding contacts can be varied accordingly, making the Powerline Vario an all-rounder. Alternatively, it is possible to charge classic NiMH round cell rechargeable batteries of sizes Micro AAA and Mignon AA in pairs. This is an enormous advantage when travelling and on the move, as only one device is required for all batteries.
The voltage and polarity of lithium battery packs are recognised automatically. Reverse polarity, short-circuiting or incorrect insertion of the batteries is therefore impossible. The microcontroller-controlled charging process starts automatically once the battery pack has been connected. In the case of NiMH batteries, the system switches to pulse maintenance charging at the end of charging, thus keeping the batteries fresh and ready for use at all times.
With the help of the individually selectable charging programs, you can charge or discharge batteries as often as you like and set the charging currents for each individual charging slot. It offers multiple overcharge protection per battery and an automatic termination of the charging process. Additional safety features include pulse maintenance charging, reverse polarity protection, and battery defect detection.
Thanks to the USB charging output, the ANSMANN battery charger Powerline 4.2 Pro is also capable of charging your compatible USB devices such as smartphones or MP3 players. The battery charger is delivered without batteries and includes a power supply.
Perfect charging is so easy – Perfect 7 charging technology. Thanks to the intelligent Perfect 7 charging technology, the Comfort Plus ensures precise and quick charging of your batteries. The fully automatic 7-stage charging significantly maximizes the lifespan and performance of your batteries. This innovative charging method is based on the latest findings from battery research and takes into account a variety of individual parameters. As a result, it is one of the most advanced and innovative chargers on the market.
Perfect 7 Charging – The next level of NiMH charging technology: Capacity quick test. Immediately after inserting, the capacity quick test determines the remaining charge of your battery and displays it on the LED panel for 5 seconds. The automatic detection of weak batteries prevents unpleasant surprises.
Gentle pre-charging: A weak or deeply discharged battery is pre-charged with a lower current if necessary. Battery analysis: The battery behavior of the cell is analyzed and evaluated to determine whether it is still reliably usable or defective.
Fast charging mode: The new Comfort Plus from ANSMANN quickly and simultaneously charges your compatible NiMH batteries with up to 650 mA in a controlled manner. This not only saves you idle time but also allows you to manage with fewer batteries overall.
IQ shutdown: Several protective mechanisms safeguard the inserted batteries against overheating and overcharging. This allows you to sit back comfortably while your battery is charged back to full capacity.
Top-off charging: At this stage, it is ensured that the battery is gently charged to 100%. Maintenance charging: The battery is kept in a fully charged state using charging pulses.
Intuitive and compact: The compact design of the charger makes it easy to take along while traveling. It is intuitive to use and operates on the simple principle of inserting and starting.
The Ansmann charger is a versatile and powerful device designed for use with various battery types. It supports charging of Li-Ion, LiFePO4, and NiMH batteries and offers the capability to charge up to four batteries simultaneously. The compatibility includes a wide range of sizes, including 26650, 22650, 18650, 18500, 17670, 16340, 14500, as well as 1-4 NiMH Micro AAA, Mignon AA, or 1-2 Baby C batteries. This charger is ideal for users seeking a reliable and efficient solution for their battery charging needs. With a battery capacity of 2650 mAh, it delivers high performance, making it well-suited for daily use. The use of USB-C connections ensures a modern and user-friendly experience.
- Charges up to 4 batteries independently
- Compatible with various battery types: Li-Ion, LiFePO4, NiMH
- Includes 8 NiMH batteries with a capacity of 2650 mAh
- Modern USB-C connections for easy use.
Ansmann Charger incl. 8 Digital NiMH Battery Mignon 2650mAh
AA, 2650 mAh, Battery + charger
With the intelligent battery charger, up to four NiMH batteries of sizes AA and AAA, three C batteries, two D batteries, or four Li-Ion batteries of size 18650 can be charged simultaneously, even mixed - regardless of quantity, size, capacity, or charge level. Each of the four charging slots is monitored and charged or discharged individually. Once a battery is inserted, the charging mode starts and fully charges the battery. Each battery is charged separately, allowing batteries of different types, capacities, and charge levels to be inserted and charged or discharged. After full charging, the charger automatically switches to pulse maintenance charging, keeping the battery charge at 100%. This ensures that the batteries are always ready for use and can remain in the charging station for extended periods. After full charging, individual battery cells can be removed and new ones inserted without affecting the charging process in the other slots. Incorrectly inserted batteries and deeply discharged batteries are detected. For professionals, the device offers the option to individually set the charging program and charging current for each slot. The Mode button allows you to select the charging mode, while the Current button sets the charging current. The currently selected setting is indicated by an arrow. If no setting is made, the charger charges at 500 mA. If you need to charge quickly, three batteries can be charged at 1500 mA or two batteries at 2000 mA, reducing the charging time accordingly. Additionally, the charger can measure capacity and discharge batteries. Whether you want to charge NiMH or lithium-ion batteries, the charging currents can be selected as follows: 4× 500/1000 mA, 3× 1500 mA, or 2× 2000 mA. The discharge current is always 500 mA. The universal charging slots can accommodate battery cells with a diameter of up to 33 mm and a length of 70 mm.