Best selling 3D printer filaments from Extrudr
This page always stays fresh and updates automatically.
1. Extrudr XPETG MATT Black 1.75 mm 1.000 g
Properties of XPETG from the PET Plastic Family
Polyethylene Terephthalate Glycol (PETG) is one of the most well-known thermoplastic polymers worldwide. Extrudr XPET-G Matte has been developed for a wide range of applications where the main requirement is a good balance between mechanical and optical material properties. The raw material is certified according to REACH and RoHS standards.
Features of XPET-G:
- Good mechanical properties
- High chemical resistance
- Low warping
- Low shrinking
- Recyclable
Printing Properties:
Printing temperature: 210 - 230 °C
Printing speed: 40 - 60 mm/s
Bed temperature: 60 - 70 °C
Difficulty level: Easy
Surface: Matte
Specific weight: 1.41 g/cm³
Heat resistant: 75 °C
Compatible nozzles: Stainless steel, hardened steel, copper, alloys, brass, ruby
Adhesion types: 3DLac adhesive spray, spring steel plate PEI, PrintaFix
Special properties: Chemical resistance
Variants:
Article number: 01148210.10
Filament: 1 kg
Packaging: Plastic spool
Spool diameter: 20 cm
Inner diameter: 5.2 cm
Spool width: 6.8 cm
Article number: 01148210.25
Filament: 2.5 kg
Packaging: Plastic spool
Spool diameter: 30 cm
Inner diameter: 5.2 cm
Spool width: 10 cm.
2. Extrudr PLA NX2 - Black - 1.75mm
PLA NX2 PLA NX2 is a new generation of PLA with improved mechanical properties. The optimized surface offers a detailed print quality. In addition, PLA NX2 enables higher printing speeds than regular PLA. - Good tensile strength - UV resistant - Complies with FDA, RoHS and Safety of Toys regulations Characteristics Filament diameter: 1.75mm Material quantity: 1100g Print speed: 40 - 120mm/s Print temperature: 180 - 230°C Heating bed temperature: 0 - 60°C Maximum load PLA NX2 combines the good mechanical properties of pure PLA with higher flexibility. Elongation at break PLA NX2 features improved elongation at break properties compared to regular PLA. Heat deflection temperature PLA NX2 remains heat deflection resistant at temperatures of 60-70°C. Difficulty The material is easy to handle and therefore suitable for beginners. Visual quality The material has a high-quality, matte surface with visibly reduced layers. This makes PLA NX2 particularly suitable for detailed prints. Layer adhesion PLA NX2 offers excellent layer and print bed adhesion. Impact resistance PLA NX2 has a higher impact resistance compared to regular PLA.
3. Extrudr Greentec Pro - Black - 1.75mm
Greentec Pro Black GreenTEC Pro comes from Extrudr's BIO-Performance range and has been specially developed for high-performance applications. The material features good flexural strength and low warping, as well as a high-quality surface. High stability Odorless, food safe and FDA compliant Biodegradable according to DIN EN ISO 14855 Technical data Print temperature 210°C - 230°C Print speed 40mm/s - 60mm/s Print bed temperature 20°C - 90°C Filament weight 800g Maximum load GreenTEC Pro offers very good mechanical and thermal load properties. Elongation at break GreenTEC Pro is a medium hard, but at the same time slightly flexible material that withstands loads well. Heat resistance GreenTEC Pro remains heat resistant at temperatures up to 160 °C. Difficulty level GreenTEC Pro is suitable for users with slight prior knowledge. Compared to materials with similar strength and heat resistance such as PC, ABS and PEEK, GreenTEC Pro is easier to process. Visual quality GreenTEC Pro has a very high visual quality. Due to the matte surface, layers are only minimally visible. Layer adhesion The layer adhesion of GreenTEC Pro is very good. When destroyed, the material breaks right through the layers. Impact resistance Thanks to its slight flexibility, GreenTEC Pro withstands external impacts well.
4. Extrudr PLA NX2 - White - 1.75mm
PLA NX2 is a new generation of PLA with improved mechanical properties. The optimized surface provides detailed print quality. Additionally, PLA NX2 allows for higher print speeds than regular PLA.
- Good tensile strength
- UV resistant
- Complies with FDA, RoHS, and Safety of Toys regulations
Features:
Filament diameter: 1.75 mm
Material weight: 1100 g
Print speed: 40 - 120 mm/s
Print temperature: 180 - 230 °C
Heated bed temperature: 0 - 60 °C
Maximum load: PLA NX2 combines the good mechanical properties of pure PLA with greater flexibility.
Elongation at break: PLA NX2 exhibits improved elongation at break properties compared to regular PLA.
Heat resistance: PLA NX2 maintains heat resistance at temperatures of 60-70 °C.
Difficulty level: The material is easy to handle, making it suitable for beginners.
Visual quality: The material features a high-quality, matte surface with visibly reduced layers, making PLA NX2 particularly suitable for detailed prints.
Layer adhesion: PLA NX2 offers excellent layer and bed adhesion.
Impact resistance: PLA NX2 has higher impact resistance compared to regular PLA.
What our customers think
Pro
- Easy to print
- Easy to process filament
- Matt surface
5. Extrudr Filament XPETG Matt Anthracite Grey 1.75mm 1000g
Properties of XPETG from the PET Plastic Family
Polyethylene Terephthalate Glycol (PETG) is one of the most well-known thermoplastic polymers worldwide. Extrudr XPET-G Matte has been developed for a wide range of applications where the main requirement is a good balance between mechanical and optical material properties. The raw material is certified according to REACH and RoHS standards.
Features of XPET-G:
Good mechanical properties
High chemical resistance
Low warping
Low shrinking
Recyclable
Printing properties:
Printing temperature: 210 - 230 °C
Printing speed: 40 - 60 mm/s
Bed temperature: 60 - 70 °C
Difficulty level: Easy
Surface: Matte
Specific weight: 1.41 g/cm³
Heat resistant: 75 °C
Possible nozzles: Stainless steel, hardened steel, copper, alloys, brass, ruby
Adhesion types: 3DLac adhesion spray, spring steel plate PEI, PrintaFix
Special properties: Chemical resistance
Variants:
Article number: 01148211
Filament: 1.10-2 kg
Packaging: Plastic spool
Spool diameter: 20 cm
Inner diameter: 5.2 cm
Spool width: 6.8 cm
Price: Available upon request.
6. Extrudr Filament PCTG Nature Transparent 1.75mm 800g
Properties of PCTG from the plastic family PET
PCTG is a modified co-polyester designed for the highest industrial standards. The material combines high chemical and thermal resistance with mechanical properties such as high impact toughness, scratch resistance, and excellent optical brilliance. It also meets numerous certifications.
Features of PCTG:
- Good mechanical properties
- High chemical resistance
- Clear colors
- Excellent transparency
- Easy printing due to low warping
Printing properties:
- Print temperature: 250 - 270 °C
- Print speed: 40 - 60 mm/s
- Bed temperature: 90 - 110 °C
- Difficulty level: Medium
- Surface: Normal
- Specific weight: 1.21 g/cm³
- Heat resistant: 80 °C
- Compatible nozzles: Stainless steel, hardened steel, copper, alloys, brass, ruby
- Adhesion types: 3DLac adhesion spray, spring steel plate PEI, PrintaFix
- Special properties: Chemical resistance, transparent
Variants:
- Article number: 011482
- Filament packaging: Plastic spool
- Spool diameter: 20 cm
- Inner diameter: 5.2 cm
- Spool width: 5.5 cm.
3D printer filament
CHF32.90
Extrudr Filament PCTG Nature Transparent 1.75mm 800g
PCTG, 1.75 mm, 800 g
7. Extrudr Filament PCTG anthracite 1.75mm 800g
Properties of PCTG from the PET plastic family
PCTG is a modified co-polyester designed for the highest industrial standards. The material combines high chemical and thermal resistance with mechanical properties such as high impact toughness, scratch resistance, and excellent optical brilliance. It also meets numerous certifications (cosmetic approval, FDA, REACH, RoHS).
Features of PCTG:
- Good mechanical properties
- High chemical resistance
- Clear colors
- Excellent transparency
- Easy printing due to low warping
Printing properties:
Printing temperature: 250 - 270 °C
Printing speed: 40 - 60 mm/s
Bed temperature: 90 - 110 °C
Difficulty level: Medium
Surface: Normal
Specific weight: 1.21 g/cm³
Heat resistance: 80 °C
Compatible nozzles: Stainless steel, hardened steel, copper, alloys, brass, ruby
Adhesion types: 3DLac adhesive spray, spring steel plate PEI, PrintaFix
Special properties: Chemical resistance
Variants:
Item number: Filament
Packaging: Spool diameter
Inner diameter: Spool width
Price: 01148211.11-20.8 kg plastic spool 20 cm 5.2 cm 5.5 cm.
8. Extrudr PLA NX2 - White - 2.85mm - 1.1kg
PLA NX2 is a new generation of PLA with improved mechanical properties. The optimized surface provides detailed print quality. Additionally, PLA NX2 allows for higher print speeds than regular PLA.
- Good tensile strength
- UV resistant
- Complies with FDA, RoHS, and Safety of Toys regulations
Features:
Filament diameter: 2.85 mm
Material weight: 1100 g
Print speed: 40 - 120 mm/s
Print temperature: 180 - 230 °C
Heated bed temperature: 0 - 60 °C
Maximum load: PLA NX2 combines the good mechanical properties of pure PLA with greater flexibility.
Elongation at break: PLA NX2 exhibits improved elongation at break properties compared to regular PLA.
Heat resistance: PLA NX2 maintains heat resistance at temperatures of 60-70 °C.
Difficulty level: The material is easy to handle, making it suitable for beginners.
Visual quality: The material features a high-quality, matte surface with visibly reduced layers. Thus, PLA NX2 is particularly suitable for detailed prints.
Layer adhesion: PLA NX2 offers excellent layer and bed adhesion.
Impact resistance: PLA NX2 has higher impact resistance compared to regular PLA.
9. Extrudr Greentec Pro Carbon - 1.75mm
The Greentec Pro Carbon 1.75mm filament from Extrudr is an innovative 3D printing material made from a biopolymer based on renewable resources. With a 10% carbon fiber content, this filament offers a combination of high stiffness and excellent mechanical properties. It is particularly suitable for applications that require increased temperature resistance, as it withstands temperatures of up to 165 °C. The material complies with REACH and RoHS standards, making it an environmentally friendly choice for 3D printing. The printing properties are designed for medium difficulty, making it accessible for both experienced and less experienced users. The matte surface and UV resistance make it ideal for a variety of applications, while the biodegradability of the material provides an additional ecological advantage.
- High stiffness and mechanical properties
- Heat resistance up to 165 °C
- Low warping and UV resistant
- Biodegradable according to DIN EN ISO 14855
- Recommended nozzle size of at least 0.50 mm.
10. Extrudr Filament Green-TEC Nature1.75mm 1.1Kg
Green-TEC Filament
Biocomponents (BDP) are made from nearly 100% renewable and natural raw materials. These raw materials are CO2-neutral and environmentally safe. This new biomaterial is a non-toxic alternative to conventional ABS, PETG, or PLA filaments, offering superior temperature resistance, hardness, and elongation. The material properties also surpass those of established 3D printing materials in terms of shrinkage and warping, making it suitable for complex and large print objects. A heated bed is not required for printing.
Application: High-performance applications in the technical field as well as a biological alternative to ABS and PETG. Very high temperature resistance. Regulation: The biopolymer complies with all regulations of the European Regulation on food contact.
Properties
- Temperature resistant up to 110-120 degrees
- Very low warping (<0.5%)
- High mechanical strength, resulting in lighter components
- Food safe
- Odorless
- High layer adhesion and good optical properties
- Biodegradable
3D Printing Settings
- Maximum print speed in mm/s: 120
- Minimum hotend temperature: 200 degrees
- Maximum hotend temperature: 230 degrees
- Recommended hotend temperature: 215 degrees
- Nozzle material: All
- Nozzle diameter: 0.25-1.2 mm
First Recommendation
- Heated bed: 35-50 degrees
- Adhesion with spray adhesive
Second Recommendation
- Without heated bed
- Adhesion with blue tape
Technical Data
- Heat resistance: 110 degrees
Diameter
Our filament is of high quality and has very low tolerances.
Typical reference values:
- Diameter: 1.75 mm
- Tolerance: +/- 0.05 mm
Spool dimensions:
- Outer diameter: 20 cm
- Width: 6.2 cm
- Inner diameter (hole): 5.2 cm.
Product order
See all products