Siemens Buffer module SITOP modular 24V

Accessory Type: Buffer Module
For Use With: SITOP

SITOP accessory. Mounting bracket. By combining a SITOP power supply with a 90° mounting bracket, minimal surface area is required on the back wall of the control cabinet. The width of the power supply becomes the depth, and the depth becomes the width. The mounting bracket is suitable for cabinets with a depth of at least 320 mm. Mounting adapter for standard mounting rail. The single-phase power supplies 6ES7305-1BA80-0AA0 and 6ES7307-1EA80-0AA0 are special mechanical versions for SIMATIC S7-300 and can be mounted on S7 rails. A mounting adapter (6ES7390-6BA00-0AA0) for installation on the standard mounting rail EN 60715 35 x 15 is available separately as an accessory. The power supplies 6ES7307-1BA01-0AA0, 6ES7307-1EA01-0AA0, and 6ES7307-1KA02-0AA0 are variants for SIMATIC S7-300 and can also be mounted on S7 rails. A mounting adapter (6EP1971-1BA00) for installation on DIN rail EN 60715 35 x 15/7.5 is available separately as an accessory. Connection plugs for devices with protection classes IP65 and IP67. For the maintenance-free DC UPS module SITOP UPS500P (6EP1933-2NC01, 6EP1933-2NC11) with protection class IP65. A connector set (6EP1975-2ES00) for input and output, along with a pre-assembled USB cable (2 m long), is available as an accessory. Device labels. Blank labeling plates for devices (20 x 7 mm, pastel turquoise) with 3RT1 900-1SB20 can be used to label the power supplies. The packaging unit includes 340 labels on frames, with 20 labels per frame. Information on usability can be found under "Accessories in the technical data of the respective power supplies.".