In Detail
850 Watt Upgrade Power Supply for Shuttle XPC Cubes
The Shuttle XPC Accessory PC850 is an internal 850W switching power supply (PSU) designed as an upgrade kit for specific Shuttle products. This power supply guarantees an excess of power for demanding processors and graphics cards. With the 80 PLUS Platinum logo and Energy Star V5.0 compliance, your electricity bill will be noticeably lower compared to previous power supply models.
Compatibility
Compatible with the following Shuttle XPCs in cube format:
- SH610R4
- SH510R4
- SH570R6 (Plus)
- SH570R8
- SW580R8
- SH310R4V2 with serial number SH310V20501...
- SH370R6V2 with serial number SH370V20801...
- SH370R6V2 Plus with serial number SH370V20901...
- SH370R8 with serial number SH370R80701...
Package Contents:
- Internal Power Supply (850 W)
- Mounting bracket with screw
- Quick installation guide
AC Input
Input Voltage: 100 - 240 V AC (auto), 50 - 60 Hz
Input Current: max. 10.0 - 6.0 A
Active Power Factor Correction (PFC) according to EN61000-3-2
AC Connection: C14 power connector, 3-pole with PE (IEC-60320/C14)
DC Output Voltages
Output Voltages (max. output current):
+3.3V (20A), +5V (20A), +12V (70.8A), -12V (0.5A), +5Vsb (3A)
Low ripple: 120 mV P-P for 12V and 50 mV P-P for 3.3/5V
Rise time: less than 20ms
Hold-up time: at least 17 ms at nominal input voltage and max. 75% load
Power-Good Signal: Turn-on delay 100 - 500ms, Turn-off delay at least 1ms (TTL and CMOS compatible)
Leakage Current: less than 3.5mA at 264Vac, 63Hz
Maximum Output Power
Combined power for +3.3V and +5V: max. 100 W
Total output power: max. 850 W
DC Connections
1x Mainboard connector (20-Pin ATX)
1x Mainboard auxiliary connector (4-Pin ATX 12V AUX)
4x Serial ATA power connectors (15-Pin SATA)
2x PCIe power connectors with 6+2 pins (for graphics card)
2x 4-Pin WST connector with 12V (black/yellow)
1x PMBus data cable, 5-Pin.