Schneider Electric Valve monitoring

Schneider Electric valve monitor XPSPVK3784
Manufacturer: Schneider Electric
Designation: Valve monitor 230VAC
Type: XPSPVK3784
Version: Basic unit

Suitable for monitoring position switches: No
Suitable for monitoring E-STOP circuits: No
Suitable for monitoring valves: Yes
Suitable for monitoring optoelectronic protective devices: No
Suitable for monitoring tactile sensors: No
Suitable for monitoring magnetic switches: No
Suitable for monitoring proximity switches: No

Electrical connection version: Screw connection
Mounting rail installation possible: Yes
Rated control supply voltage Us at AC 50 Hz: 230 V
Rated control supply voltage Us at AC 60 Hz: 230 V
Voltage type for actuation: AC/DC
With removable terminals: No
Evaluation of inputs: Single-channel or single and dual-channel
With start input: No
With muting function: No
With feedback loop: No
Release delay: 0..0.04 s
Number of outputs, safety-related, non-delayed, contact-based: 2
Number of outputs, signalling function, non-delayed, contact-based: 4
Safety type according to IEC 61496-1: 1
Stop category according to IEC 60204: Other
Performance level according to EN ISO 13849-1: Level e
SIL according to IEC 61508: 3
With approval for BG BIA: No
With approval according to UL: Yes

Width: 152 mm
Height: 73 mm
Depth: 118 mm
With TÜV approval: Yes

Schneider Electric valve monitoring XPSPVK3784 is a safety module for dynamic monitoring of press safety valves on mechanical presses, where the clutch and brake controls must be monitored dynamically. The clutch/brake control is usually activated by a double solenoid valve, which provides the function of two separate valves in one housing. This safety module checks the proper function of the safety valve at three points in the stroke cycle: top dead centre, takeover point, and end of stroke. The supply voltage is 230 VAC.